How to Update Lonsdor K518ISE Hibernation Function and Kernel ?

Updated Device: Lonsdor K518ISE

Updated Condition: for all K518 devices with working normally

Updated Content: Added Hibernation function; Kernel update supported

Update Benefit: Save power to prolong stand-by time. Auto standby function can prevent the device from being overheated in hot summer.

Updated Version: K518 APK V1.5.25

Preparation for Update:

1.Power on the device or keep the battery level over 80%.

2.Make sure wifi network is in good condition and the device receives signal normally

Update steps:

1.Click [One key update] and skip to below K518ISE interface. Then click the first button to update system. When the update complete, click [OK] to reboot the device.

4

5

6

2.After rebooting, click and enter [Settings] menu, you will find there are two additional function buttons: [Update Kernel ] and [Display Settings].

7

3.Click [Update Kernel] first and skip to below interface, then press [Update] to update the kernel.

89

4.Click [Install] after updating the kernel file. And the device will reboot to install kernel.

10

5.Blank screen is normal during the installation. The whole process will take 5 minutes, be patient to wait and don’t restart the device manually.

11

12

6.The update complete when the password input interface appears. Screen auto-lock in the [Display Settings ] is added.

13

7.Enter [Settings]→[Display Settings] to adjust the screen brightness and screen auto-locking time .

14

Save power to prolong stand-by time. Auto standby function can prevent the Lonsdor K518ISE from being overheated in hot summer.