How to set IP address for MB SD Connect C4 DoIP Diagnostic Scanner ?

When you use new MB Star SD Connect C4 DoIP diagnostic scanner, you need set IP address first.Follow steps below shows how to configure SD Connect C4 DoIP multiplexer:

1

 

1.Go to local network connection

2

2.Press Properties

3

3.Choose Internet Protocol Version 4 (TCP/IPv4), press OK to continue

4

4.Enter IP address

IP address: 172.29.127.24

Subnet mask: 255.255.0.0

5

5.Click on Advanced

6

6.Click on Add to configure DoIP IP address

7

7.Set DoIP IP address to 169.254.0.** (i.e 169.254.0.45)

8.Click on OK to finish configuration.