How to Program the Key for Mercedes AXOR Truck if All Keys Lost?

OEM Tango Programmer Software Version:

Firmware version :V4.8;

Software version:V1.111

Supported languages: English.

We have original Tango Key Programmer with Basic Software.

Here is the procedure to program the key for Mercedes AXOR Truck:

i.e 2005 Benz AXOR truck

Read and save 93c86 eeprom dump data with Orange5 programmer

Open Tango key programmer

Select Car Model->Mercedes Benz->Trucks->Axor-> pre-2011(93C56, C66, C86)

Select Transponder Type-> Megamos 13

Put transponder/chip into Tango, read 10-digit transponder data: 15 0D DC C8 36

Select Car Model->Mercedes Benz->Trucks->Axor-> pre-2011(93C56, C66, C86) again

Upload dump data read by Orange 5

Select a unused key position and write key

Select transponder type: MEGAMOS 13

Tango has created the new file

Save data.

Upload the new file to the immobilizer memory to complete key making

Run Orange5 software, select eeprom type: 93C86

Open new key file

To create more keys use the new file.

Select Special Function->Set type of VVDI super transponder-> Set as ID13

Manually enter transponder ID that read from Tango programmer above

set chip ID ok

Go to Transponder Clone

Put the transponder into vvdi mini key tool’s coil to detect

The chip ID is successfully changed.

Now the transponder will start Axor truck.

Done.