Volvo Premium Tech Tool PTT 2.8.150 Development Mode & Dev tool Plus 2022 The latest software for Volvo VOCOM and Volvo Vocom II Diagnostic tool
2021 Volvo PTT V2.8.150 +Devtool v2.7+ACPI Plus 2021/05 Installation
Volvo PTT PC Installation Requirements:(Recommend)
Computer/Processor:Intel Core i5 or AMD FX 8 Core Series
Memory (RAM):6 GB, more memory improves performance
Hard Disk:120 GB SSD(Solid State Drive) of free hard Hard disk
Optical Drive:DVD x8 drive
Display: XGA(1024×768 pixels) or higher resolution monitor with 32 bit color setings
Imput device:Keyboard and mouse or compatible pointing device
Internet connection:Network using 10 Mbps or higher speed network adapter and/or WLAN
Miscellaneous:USB interface required
A battery-pack that may provide 500 mA via USB
Volvo Premium Tech Tool Software Include:
1.Volvo TechTool
2.Dev2tool
3.Developer tool Plus(Acpi+ 2021/5) (for programming parameters version 3 and 4 – newer trucks)
Volvo Premium Tech Tool Features:
1.2.8 version Only work with original nexiq,Vocom 2, Vocom 1.(for other interface please use 2.7 version)
2.Premium Tech Tool 2.8.81 work on Window 7/8/10 (32bit & 64bit)
3.Devtool work on Window 7/8/10 (only 64bit)
4.Multi-languages,more then 25 languages
5.update online
Developer Tools Featured options:
• Chassis ID Change.
• Immobilizer ON/OFF.
• Injector programming.
• Speed Limit programming.
• EUR6 trucks supported.
Premium Tech Tool (PTT) supports the following brands/models:
Volvo Trucks Older electrical system
Volvo Trucks Vehicle electronics ’98
Volvo Trucks VERSION2
Volvo Trucks VERSION3
Volvo Trucks VERSION4
Volvo Buses Conventional
Volvo Buses Multiplexed
Volvo Buses Multiplexed version 2
Volvo Buses Multiplexed version 3
Volvo Penta
Volvo Construction Equipment
Mack V-MAC I/II/III, ITC
Mack V-MAC IV
Mack VMAC IV+
Renault Version2 ACCESS
Renault Version2 CAESAR
Renault Version2 COMPRT
Renault Version2 EXTRT
Renault Version2 HYBRYS
Renault Version2 KERAX
Renault Version2 KERAXMIL
Renault Version2 MAGNUM
Renault Version2 MIDLUM
Renault Version2 PREMIUM
Renault Version2 SHERPAL
Renault Version2 SHERPAM
Renault Version2 VAB
Renault Version2 VBCI
Renault Version2 VLRA
UD Trucks Version2 UD-HD
UD Trucks Version2 UD-MD
Volvo PTT 2.8.150 Update Release:
EICHER:
Important information
Important application updates.See the Tech Tool Release News for more information.
General information
Improved handling of DTC reporting for VERSION4 control units in VERSION3 vehicle during programming
User interface is improved during the Product identification.Now Product data and Central data progress is shown appropriately
Operation updates
Improvements in the identification of adapter connection and disconnecting during execution of any programming operations Improved error handling for programming operations.
Mack:
Important information
Important application updates. See the Tech Tool Release News for more information.
Diagnostic news
Fault tracing and operations added for electric trucks. Only applicable to North America. Applicable for models: VNE, LRBE
General information
Improved handling of DTC reporting for VERSION4 control units in VERSION3 vehicle during programming
User interface is improved during the Product identification. Now Product data and Central data progress is shown appropriately
Operation updates
Improvements in the identification of adapter connection and disconnecting during execution of any programming operations
Improved error handling for programming operations
Diagnostic updates
Fault tracing for Front Active Steering and Front Active Steering Gateway DTCs are now available in HMD. Applicable to North America and models are: AN, GR VN, VHD
Renault Trucks:
Important information
Important application updates. See the Tech Tool Release News for more information.
General information
Improved handling of DTC reporting for VERSION4 control units in VERSION3 vehicle during programming User interface is improved during the Product identification. Now Product data and Central data progress is shown appropriately
Operation updates
Improvements in the identification of adapter connection and disconnecting during execution of any programming operations Improved error handling for programming operations Operation 2589-08-03-18/25065-3 Exaust aftertreatment system analysis’ is updated. Applicable models are: MD, MHD
Diagnostic updates
Updated symptom based diagnostic is provided for exported trucks.
SDLG:
Important information
Important application updates.See the Tech Tool Release News for more information.
General information
Improved handling of DTC reporting for VERSION4 control units in VERSION3 vehicle during programming User interface is improved during the Product identification.Now Product data and Central data progress is shown appropriately
Operation updates
Improvements in the identification of adapter connection and disconnecting during execution of any programming operations Improved error handling for programming operations
UD Trucks:
Important information
Important application updates. See the Tech Tool Release News for more information.
General information
Improved handling of DTC reporting for VERSION4 control units in VERSION3 vehicle during programming User interface is improved during the Product identification. Now Product data and Central data progress is shown appropriately
Operation updates
Improvements in the identification of adapter connection and disconnecting during execution of any programming operations Improved error handling for programming operations
Diagnostic updates
New DTCs related to front load sensor is added for the trucks equipped with Volvo Dynamic Steering (VDS). Applicable model: UD-HD2
DTCs related to LED tail lamp is updated. Applicable models are: UD-HD2, UD-HD3
Operation 72204-3′ Load Sensor, Calibration’ and DTCs related to front load sensor are updated.
Volvo Buses:
Important information
Important application updates.See the Tech Tool Release News for more information.
General information
Improved handling of DTC reporting for VERSION4 control units in VERSION3 vehicle during programming User interface is improved during the Product identification.Now Product data and Central data progress is shown appropriately
Operation updates
Improvements in the identification of adapter connection and disconnecting during execution of any programming operations Improved error handling for programming operations.
Volvo CE:
Important information
Important application updates. See the Tech Tool Release News for more information.
General information
Improved handling of DTC reporting for VERSION4 control units in VERSION3 vehicle during programming User interface is improved during the Product identification. Now Product data and Central data progress is shown appropriately
Operation updates
Improvements in the identification of adapter connection and disconnecting during execution of any programming operations
91010-3 Hybrid hydraulic system, check’ is updated for Crawl Excavator models: EC250E, EC300E, EC350E EC380E, EC480E
91004-3 Sensor values hydraulic system, check,91625-3′ Boom float position function, check and 30901-3′ Power supply control unit
(ECU) check’ are updated for Crawl Excavator with hybrid option. Applicable models are: EC350E, EC380E, EC480E Improved error handling for programming operations
Operation news
Operation support updated for VERSION3 Wheel Paver model: P6870D Diagnostic updates Diagnostic Support is updated for Crawl Excavator with hybrid option. Applicable models are: EC350E, EC380E, EC480E Smart Diagrams support is added for Soil Compactor models: SD115B, SD135B, SB160B
Volvo Trucks:
Important information
Important application updates. See the Tech Tool Release News for more information.
Diagnostic news
Fault tracing and operations added for electric trucks. Only applicable to North America. Applicable for models: VNE, LRBE
General information
Improved handling of DTC reporting for VERSION4 control units in VERSION3 vehicle during programming User interface is improved during the Product identification. Now Product data and Central data progress is shown appropriately
Operation updates
Improvements in the identification of adapter connection and disconnecting during execution of any programming operations Improved error handling for programming operations Improvement is done for volvo dynamic steering (VDS) calibration. Applicable to Latin America market and model is: VM Autonomous
Operation 2589-08-03-18/25065-3′ Exaust aftertreatment system analysis’ is updated. Applicable models are: MD, MHD
Diagnostic updates
Symptom based diagnostic is improved for the trucks equipped with ADR. Applicable to Latin America market and applicable model is: FH(4)
Fault tracing for Front Active Steering and Front Active Steering Gateway DTCs are now available in HMD. Applicable to North America and models are: AN, GR VN, VHD
Volvo PTT 2.7.115 Release Note:
EICHER
Diagnostic News
Fault tracing added for new control unit for engine management system with BS3 regulations.Applicable for models:
EICH-HD
EICH-HDN
Mack
Important information
Improvements made to operation 6476-07-03-01 ‘ Active Steering Calibration’, applicable to vehicles with Volvo Dynamic Steering. Only applicable to North America.
Diagnostic news
Fault tracing and operations added for new vehicle control unit, VECU5, configured vehicles. Applicable for models:
FEE(3), FLE(3), DWIDE ZE, DZE
FL(3), FE(3),D WIDE,D NARROW,C 2STEPS
CSM, CLX, ANA, CMH
Diagnostic updates
Improvements made to operation 2300-08-03-02/32022-3 Fuel Pressure. For vehicles with US20 and US21 emission levels, this operation can check and monitor fuel filter clogging symptoms and conditions. Only applicable to North America.
Renault Trucks:
Diagnostic news
Fault tracing and operations added for new vehicle control unit, VECU5, configured vehicles. Applicable for models:
FEE(3), FLE(3), DWIDE ZE, DZE
FL(3), FE(3),D WIDE,D NARROW,C 2STEPS
CSM, CLX, ANA, CMH
Fault tracing and operations added for new body builder module, BBM2, configured vehicles. Applicable for models:
FEE(3),FLE(3),DWIDE ZE,DZE
FL(3), FE(3),D WIDE,D NARROW,C 2STEPS
Diagnostic updates
Fault tracing for electrical vehicle control module(EVCM) added for electric trucks, applicable for models D Wide ZE and D Narow ZE.
UD Trucks:
Diagnostic news
Fault tracing and operations added for IECU2.0 configured vehicles. Applicable for models:
UD-HDE
Faut tracing support added for Volvo Dynamic Steering system. Applicable for models:
UD-HD2
Diagnostic updates
Improved fault tracing added for aftertreatment control module(ACM) and human-machine interface I/O modules(HMIlOM).
Applicable for models:
CF-CZ
UD-HD2
UD-HD3
Improved fault tracing added for engine management system. Applicable to model UD-HD2.
Volvo CE:
Diagnostic updates
Fault tracing support added.
Applicable for models:
P6870D,P8820D
DD128C,DD135,DD145
ECR25DL,ECR50F,ECR58F
EWR130E,EW200EMH
L28H
EC120E,EC210E
Volvo Truck:
Important information
Improvements made to operation 6476-07-03-01″Active Steering Calibration’, applicable to vehicles with Volvo Dynamic Steering. Only applicable to North America.
Diagnostic news
Fault tracing and operations added for new vehicle control unit,VECU5, configured vehicles.
Applicable for models:
FEE(3),FLE(3),DWIDE ZE,DZE
FL(3), FE(3),D WIDE, DNARROW,C 2STEPS
CSM, CLX, ANA, CMH
Fault tracing and operations added for new body builder module, BBM2, configured vehicles.
Applicable for models:
FEE(3), FLE(3), DWIDE ZE, DZE FL(3), FE(3),D WIDE,D NARROW,C 2STEPS
Diagnostic updates
Fault tracing for electrical vehicle control module(EVCM) added for electric trucks,applicable for models FEE(3) and FLE(3).
Improvements made to operation 2300-08-03-02/32022-3 Fuel Pressure. For vehicles with US20 and US21 emission levels, this operation can check and monitor fuel filter clogging symptoms and conditions. Only applicable to North America.
Any question you have please contact us:
https://www.obd2tool.com/goods-10499-Volvo-PTT-Devtool-ACPI-Plus-Latest-software-Installation-Activation-Service.html