{"id":13077,"date":"2021-04-15T12:44:57","date_gmt":"2021-04-15T12:44:57","guid":{"rendered":"https:\/\/www.obd2tool.com\/blog\/?p=13077"},"modified":"2021-04-15T12:44:57","modified_gmt":"2021-04-15T12:44:57","slug":"autel-maxisys-elite-esp-coding-programming-on-2009-mercedes-benz-glk350","status":"publish","type":"post","link":"https:\/\/www.obd2tool.com\/blog\/autel-maxisys-elite-esp-coding-programming-on-2009-mercedes-benz-glk350\/","title":{"rendered":"Autel Maxisys Elite ESP Coding Programming on 2009 Mercedes Benz GLK350"},"content":{"rendered":"

Hey guys I\u2019m gonna to use Autel MaxiSys Elite diagnostic tool<\/a> to program a 2009 Mercedes Benz GLK350 VIN in ESP module. This vehicle was replaced the ABS module and has the warning message right on the dashboard.<\/p>\n

As you can see, this is the fault codes 7266 and 6301 stored in Autel MaxiSys Elite. It says the VINs in the control modules \u201cN30\/4(ESP control module)\u201d and \u201cN73(EIS\/EZS control module)\u201d do not correspond. So I am going to change the VIN in the ESP module.<\/p>\n

\"\"
\n\"\"<\/p>\n

Exit the reading codes page,<\/p>\n

Control unit adaptations >> Configuration >> Manual setting >> Special function VIN
\n\"\"
\n\"\"
\n\"\"
\n\"\"<\/p>\n

Do you want to transfer VIN number to control module \u201cN30\/4(ESP control module)\u201d?
\nThis is the current VIN number, press \u201cYes\u201d.<\/p>\n

Turn off the ignition, press \u201cOK\u201d.<\/p>\n

Turn on the ignition, press \u201cOK\u201d.<\/p>\n

VIN presently stored in the control module. Press \u201cContinue\u201d.<\/p>\n

\"\"<\/p>\n

\"\"
\n\"\"
\n\"\"<\/p>\n

Complete!<\/p>\n

Okay, let me cycle the ignition to see what happens. To see if that warning message come back. Alright, no message for the ESP module, it has gone!<\/p>\n

Let\u2019s go back to read the trouble codes again.
\nIt says: \u201c No fault codes detected.\u201d
\n\"\"
\n\"\"<\/p>\n

This is the first time I did to program a Mercedes Benz ESP VIN, and I\u2019m glad to see this Autel MaxiSys Elite Scan Tool can do the job. It is quite easy.<\/p>\n

\"\"\u00a0\"\"<\/p>\n