{"id":13568,"date":"2021-05-27T02:52:38","date_gmt":"2021-05-27T02:52:38","guid":{"rendered":"https:\/\/www.obd2tool.com\/blog\/?p=13568"},"modified":"2023-05-24T09:59:06","modified_gmt":"2023-05-24T09:59:06","slug":"latest-version-cat-caterpillar-et-2021a-electronic-technician-diagnostic-software-with-1-time-free-activation","status":"publish","type":"post","link":"https:\/\/www.obd2tool.com\/blog\/latest-version-cat-caterpillar-et-2021a-electronic-technician-diagnostic-software-with-1-time-free-activation\/","title":{"rendered":"Latest Version Cat Caterpillar ET 2021A Electronic Technician Diagnostic Software With 1 Time Free Activation"},"content":{"rendered":"

Latest Version Cat Caterpillar ET 2021A Electronic Technician Diagnostic Software With 1 Time Free Activation<\/strong><\/a><\/p>\n

Note:<\/strong>
\n1.After receiving the payment, we will send you the software by email.
\n2. we will remote help customer installed and activation for a single PC by Teamviewer!<\/p>\n

\"\"<\/p>\n

Diagnostic Software Caterpillar ET 2021A (replaces CAT ET 2020B, 2019C, 2018A) :<\/strong>
\n1.Latest Caterpillar ET 2021A Software to work with CAT\/CAT3 Truck Scanner
\n2.With one free activation, can send software online
\n3.Support Multi-languages\uff1aEnglish, Chinese, Danish, French, German, Italian, Japanese, Portuguese, Russian, Spanish
\n4. OS:Windows 7 32 bit, Windows 7 64 bit, Windows 8\/8.1 32 bit, Windows 8\/8.1 64 bit, Windows 10 32 bit, Windows 10 64 bit PC, Communication Hardware, and Cable Requirements
\nTo run the service tool, the next PC, communication hardware, and cable requirements must be met.<\/p>\n

NOTE: The minimum PC Configurations should not be used as a standard when buying new personal computers for service tool purposes. If the existing equipment meets these minimum requirements, it will run the service tool.<\/p>\n

PC Requirements<\/strong>
\nRecommended Configurations
\nPC containing a 2.0 GHz dual-core processor
\n3GB RAM
\n3GB of the available hard disk drive
\nDVD-ROM drive (optionally)
\n15.4-inch XGA Screen (1280×1024 compatible)
\nMicrosoft Windows\u2122 7 Professional or Windows 8 Professional, Windows 10 Professional (Not tested with Home Edition) (Note: Windows 8 RT is not supported)
\nRS232 port with 16550AF UART or compatible (for use with Comm Adapter II)
\nUSB 1.1 or 2.0 port (for use with Comm Adapter 3)
\nEthernet RJ45 connector
\nBuilt-in pointing device or mouse
\nFor security purposes, Microsoft Internet Explorer version 11 or newer or Microsoft Edge is recommended.
\nNote: The most recent version of Microsoft Internet Explorer may not be validated to work with the service tool.<\/p>\n

Caterpillar electronic technician 2021A with WinFlash future is an updated version of the caterpillar dealer diagnostic software that can help technicians to diagnose existing and potential problems with their electronically controlled Caterpillar Engines and Machines.<\/p>\n

To get the vehicle information the Cat ET software must be connected to the Electronic Control Module (ECM). For this purpose, you need a suitable diagnostic link adapter (DLA), for instance, Genuine CAT Comm Adapter III .<\/p>\n

The laptops with ARM CPUs (Snapdragon 8cx, Microsft SQ1, etc) type are not supported!<\/p>\n

Microsoft ended extended support for Windows 7 as of January 2020. The CAT ET service tool no longer supports Windows 7 as of the 2020B release. The installation is still possible, but we’re not able to guarantee the stable work of 2020B or later versions.<\/p>\n

The list of supported CAT machines and engines can be found below:<\/strong>
\nEngines:<\/strong>
\nElectric Power
\nElectric Power Generation
\nIndustrial
\nMarine Power Systems
\nOil and Gas<\/p>\n

Machines:<\/strong>
\nArticulated Trucks
\nAsphalt Pavers
\nBackhoe Loaders
\nCold Planers
\nCompactors
\nDozers
\nDrills
\nExcavators
\nFeller Bunchers
\nForest Machines
\nForwarders
\nHarvesters
\nHydraulic Mining Shovels
\nKnuckleboom Loaders
\nMaterial Handlers
\nMotor Graders
\nOff-Highway Trucks
\nPipelayers
\nRoad Reclaimers
\nSite Prep Tractors
\nSkid Steer and Compact Track Loaders
\nSkidders
\nTelehandlers
\nTrack Loaders
\nUnderground – Hard Rock
\nUnderground – Longwall
\nUnderground – Room and Pillar
\nUtility Vehicles
\nWheel Dozers
\nWheel Excavators
\nWheel Loaders
\nWheel Tractor-Scrapers<\/p>\n

What’s New – 2021A<\/strong>
\nNo significant new features or feature enhancements<\/p>\n

What’s New – 2020C<\/strong>
\nNo significant new features or feature enhancements<\/p>\n

What’s New – 2020B<\/strong>
\nTrainer Update \u2013 299D3
\nThe 299D3 Skid Steer Loader has been added to the Trainer application.<\/p>\n

What’s New – 2020A<\/strong>
\nProduct Status Report Updates
\nThe Product Status Report has been updated to include throttle configuration information.
\nBuilt-in Factory Password Generator
\nThe experimental feature allows you to decode (18-Bit passwords not supported) factory passwords<\/p>\n

What’s New – 2019C<\/strong>
\nIndication of Selected Communications Adapter
\nThe service tool now displays the selected communications adapter when the service tool is disconnected. The adapter name is displayed in the status area at the bottom right of the service tool window.
\nEnd of Support for Windows 7
\nMicrosoft is ending extended support for Windows 7 as of January 2020. The service tool will be ending support for Windows 7 as of the 2020A release.<\/p>\n

What’s New – 2019B<\/strong>
\nAutomatic Product Status Report (PSR) Upload
\nThe service tool includes a new tool that automatically uploads Product Status Reports. The tool scans for newly generated Product Status Reports and uploads them when an internet connection is available. The default is that automatic report uploading is enabled. The Preferences dialog has an option to disable the tool.<\/p>\n

What’s New – 2019A<\/strong>
\nECM Naming Changes
\nCertain ECMs connect to the service tool over two data links at the same time. The service tool shows a message popup when the ECM is only detected on one link. The service tool has been changed to add the text **INCOMPLETE** in the ECM name when the connection is incomplete. Service tool features that display a connection icon also use a new icon for an incomplete connection.<\/p>\n

What’s New – 2018C<\/strong>
\nNo significant new features or feature enhancements<\/p>\n

What’s New – 2018B<\/strong>
\nCEOS Fleet Configuration File TOP
\nA CEOS (Customer Electronic Option Selection) Fleet Configuration File can be created\/modified for an engine using the Service Tool. This is available in connected and disconnected mode.
\nError When Launching Service Tool
\nThere is a Microsoft issue with upgrading libraries during an installation involving certain versions of the C++ redistributable. After a successful service tool installation, when trying to run the service tool for the first time, one of the following errors may occasionally appear: \u201cThe entry point could not be located in api-ms-win-crt-runtime\u201d or \u201cThe program can’t start because mfc140u.dll is missing from your computer.\u201d If either of these messages is displayed, please let us know and we will send you to step by step troubleshooting guide. This procedure requires administrator rights.
\nService Tool License Corruption Issues with Windows 10 Updates
\nWindows 10 updates 1709 and 1803 will corrupt service tool licenses. Future Window 10 updates may do the same
\nIf either of the license error messages is displayed, please let us know and we will send you to step by step troubleshooting guide.<\/p>\n

What’s New – 2018A<\/strong>
\nTrainer Update – 988K XE Wheel Loader
\nThe 988K XE Wheel Loader has been added to the Trainer application.<\/p>\n

What’s New – 2017C<\/strong>
\nPreferences Option to Save a Product Status Report to PDF
\nThe Preferences dialog for the Product Status Report has changed. The dialog contains a new checkbox to automatically save a Product Status Report as a PDF file when the report is created. The service tool will continue to automatically save Product Status Reports as an XML file.<\/p>\n

What’s New – 2017B<\/strong>
\nProduct Status Report Updates
\nThe Product Status Report has been updated to include certain history features supported by the ECM, such as the after-treatment Regeneration History and the Service Test History.
\nWinflash Screen Update
\nThe screen for the Winflash feature has been updated. A new Expand All button opens all sections of the screen to show all details for ECMs detected by WinFlash. A new Collapse All button hides all sections of the screen, except for header rows showing detected ECM names.<\/p>\n

Communication Hardware<\/strong>
\nCaterpillar Communication Adapter III
\nConfiguring Cat Electronic Technician to use the Communication Adapter 3
\nFor Cat Electronic Technician to work with the Communication Adapter 3, the settings must be changed to select the Communication Adapter 3 as the Communication Interface Device:
\nStep 1 Start Cat Electronic Technician.
\nStep 2 Click the Stop Connect button when it appears.
\nStep 3 Select the Utilities menu.
\nStep 4 Choose \u201cPreferences > Modify…\u201d.
\nStep 5 Select the Communications tab.
\nStep 6 Select Cat Comm Adapter 3 (RP1210) and click OK.
\nNOTE: Because a growing number of products require multiple data link service, the \u201cEnable Dual Datalink Service\u201d checkbox has been pre-selected.
\nServicing ECMs on more than one data link requires this check box to be enabled.
\nFailure to do this will result in undetected ECMs and reduced functionality.<\/p>\n

Package Includes:<\/strong>
\n1pc x Caterpillar ET 2021A software (Can choose to send online)<\/p>\n","protected":false},"excerpt":{"rendered":"

Latest Version Cat Caterpillar ET 2021A Electronic Technician Diagnostic Software With 1 Time Free Activation Note: 1.After receiving the payment,<\/p>\n","protected":false},"author":1,"featured_media":13569,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[1623,3224],"tags":[1391,2448,1392,2450,2451,2449,1624,943,2452],"views":4317,"_links":{"self":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts\/13568"}],"collection":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/comments?post=13568"}],"version-history":[{"count":2,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts\/13568\/revisions"}],"predecessor-version":[{"id":13607,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts\/13568\/revisions\/13607"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/media\/13569"}],"wp:attachment":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/media?parent=13568"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/categories?post=13568"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/tags?post=13568"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}