{"id":13910,"date":"2021-06-28T10:35:38","date_gmt":"2021-06-28T10:35:38","guid":{"rendered":"https:\/\/www.obd2tool.com\/blog\/?p=13910"},"modified":"2021-12-05T04:25:54","modified_gmt":"2021-12-05T04:25:54","slug":"how-configure-connection-between-scania-vci3-pc-by-wireless","status":"publish","type":"post","link":"https:\/\/www.obd2tool.com\/blog\/how-configure-connection-between-scania-vci3-pc-by-wireless\/","title":{"rendered":"How Configure Connection Between Scania VCI3 & PC by Wireless"},"content":{"rendered":"

Lone ago Obd2tool.com<\/a> share a guide on How to Setup WIFI for Scania VCI-3 VCI3 V2.21,now here another more detail about wireless configuration guide here.If are Scania VCI3 user and don\u2019t know how to do it,please read it clearly!!!<\/p>\n

Preparations:<\/strong><\/p>\n

Newest Scania SDP3 Diagnostic Software Free Download<\/a><\/p>\n

Scania VCI3 Interface<\/a><\/p>\n

Procedures:<\/strong><\/p>\n

If communication between the computer and VCI3 is to run on a wireless network, the settings for the wireless network must be set correctly for communication to work.
\nThe following technical requirements must be in place for e.g. the diagnostic tools SDP3 or BST to establish a communication link with a wireless VCI3 via a wireless network:
\n\u2022 VCI3 must be supplied with power via the OBD connector.
\n\u2022 VCI3 must be configured for a wireless network.
\n\u2022 The local network which the computer and VCI3 are connected to must be configured so that it allows broadcast from units. If the computer and VCI3 communicate via wireless direct connection, this happens automatically.
\n\u2022 The computer must be connected to the network which VCI3 is on.
\n\u2022 Two users cannot connect to the same VCI3 simultaneously.
\n\u2022 If VCI3 is configured to request a connection password, the correct password must be given in SDP3 when connecting.<\/p>\n

Configuring VCI3<\/strong>
\nUsing VCI Configurator, that is available via SDP3, you can configure VCI3 to suit your business. Here you can, for example, change the name of a VCI3 or the network settings.
\n1.Connect VCI3 to the computer via the USB port.
\n2.Start SDP3.
\n3.Click the Settings menu.
\n4.Select Start VCI Configurator.
\nNote:It is only possible to configure one VCI3 at a time.<\/p>\n

General settings<\/strong>
\nIn the panel at the top of the configuration program window, there are a number of settings which are more general.<\/p>\n

1.Configuration password<\/strong>
\nIn the panel at the top of the configuration program window, you can set a configuration password. This password is necessary in order to configure VCI3 and is specific to each VCI3 unit.
\nIf the password does not met the requirements,a red border appears around the field. Move the mouse pointer over the field to get information on the requirements set on the password.<\/p>\n

2.Connection password<\/strong>
\nA connection password protects the VCI3 from being used by anyone who is not authorised.
\nThe connection password also protects against unintentional connection to a VCI. It is recommended to protect VCI3 using a connection password but it is not compulsory. The password must be entered whenever anyone wants to connect to VCI3 from SDP3.
\nMove the mouse pointer over the field to get information on the requirements set on the password.<\/p>\n

3.VCI name<\/strong>
\nThe name of your VC13 is optional and you set it here. When you search for the VCI3 on the network, this is the name which is displayed. If there are several VCI3s on the same network,
\neach VCI3 must have a unique name.Move the mouse pointer over the field to get information on the requirements set on the VCI name.<\/p>\n

\"\"<\/p>\n

Configurations<\/strong>
\nYou can create up to 4 unique configurations in the configuration program.
\nBy creating different configurations you can use different networks for the same VCI.
\nCreate the configurations in the configuration program and then select the configuration you want to use in SDP3.
\nIn SDP3 you can select which configuration you want to use via the menu option Connection\/Select VCI configuration.<\/p>\n

New configuration<\/strong>
\nCreate a new configuration by clicking the New Configuration button.<\/p>\n

\"\"<\/p>\n

Copy network settings<\/strong>
\n1.Click Available networks in VCI Configurator. A list of available networks is opened.
\n2.Select network.
\n3.Click Copy settings. The settings are automatically copied into VCI Configurator.
\nDepending on how the selected network is configured, various settings will be copied over. You get the IP address in connection with this. For more information, refer to Configuration of IP settings for wireless direct connection.
\n4.Enter password phrase. The program automatically generates encryption keys.<\/p>\n

\"\"<\/p>\n

Manual configuration<\/strong>
\nNetwork settings are necessary for VCI3 to communicate with a computer via a wireless connection.
\nVCI3 must have the same network settings as the computer which will connect to it. The IP address is the only setting which must be unique to each unit (VCI3, computer).<\/p>\n

1.Configuration name
\nEnter the configuration name here. Each configuration has a unique name.<\/p>\n

2.Activate configuration
\nThis is where you activate your configuration.<\/p>\n

3.Test configuration
\nThis is where you test your configuration. Tobe able to test the configuration, it must first be activated.<\/p>\n

4.Available networks
\nThis is where to check which networks are available.<\/p>\n

\"\"<\/p>\n

1.Network type
\nHere you select whether this configuration is to be connected via an existing wireless network
\nor via wireless direct connection to the computer. The different configurations can be configured for different network types.<\/p>\n

2.SSID
\nSSID is the name of the wireless network.
\nIf the computer and VCI3 are going to communicate via a wireless network, the configuration\u2019s network name (SSID) must be identical to the wireless network name (SSID).
\nIf the computer and VCI3 are going to communicate via a wireless direct connection, the network name identifies the profile when the user connects to the VCI3 wireless network in Windows.
\nMove the mouse pointer over the field to get information on the requirements set on SSID.<\/p>\n

\"\"<\/p>\n

Region and channel<\/strong>
\nRegion specifies the geographical region the VCI3 profile is to be used in. The choice of region affects technical properties of the VCI3 wireless network, such as transmission frequency etc.<\/p>\n

Note:<\/strong>
\nFor units which communicate via WLAN, each country has rules about permissible channels, maximum number of users and maximum power output within the channel frequency range. It could be against the law not to follow these rules.<\/p>\n

Contact your local Network administrator or appropriate authority in the country where the product will be used to ensure that you make the correct settings.<\/p>\n

Select channel as follows:<\/strong>
\n\u2022 Wireless network: tick the box for automatic channel selection.
\n\u2022 Wireless direct connection: any channel between 1 and 11.
\nThe different profiles can be configured for different regions and channels.<\/p>\n

\"\"<\/p>\n","protected":false},"excerpt":{"rendered":"

Lone ago Obd2tool.com share a guide on How to Setup WIFI for Scania VCI-3 VCI3 V2.21,now here another more detail<\/p>\n","protected":false},"author":1,"featured_media":13916,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[65],"tags":[2297,2300,2299,2015,2016,2565,2298],"views":5129,"_links":{"self":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts\/13910"}],"collection":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/comments?post=13910"}],"version-history":[{"count":2,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts\/13910\/revisions"}],"predecessor-version":[{"id":15675,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts\/13910\/revisions\/15675"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/media\/13916"}],"wp:attachment":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/media?parent=13910"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/categories?post=13910"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/tags?post=13910"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}