{"id":13927,"date":"2021-06-30T11:19:42","date_gmt":"2021-06-30T11:19:42","guid":{"rendered":"https:\/\/www.obd2tool.com\/blog\/?p=13927"},"modified":"2021-07-02T11:26:18","modified_gmt":"2021-07-02T11:26:18","slug":"obdstar-x300-dp-plus-program-2021-gmc-yukon-prox-all-keys-lost-via-can-fd-adapter","status":"publish","type":"post","link":"https:\/\/www.obd2tool.com\/blog\/obdstar-x300-dp-plus-program-2021-gmc-yukon-prox-all-keys-lost-via-can-fd-adapter\/","title":{"rendered":"OBDSTAR X300 DP Plus Program 2021 GMC YUKON Prox All Keys Lost via CAN FD Adapter"},"content":{"rendered":"

The least expensive way to program new proximity on this 2021 GMC YUKON when all keys lost should be OBDSTAR X300 DP PLUS<\/a> (key master dp plus) and CAN FD GM adapter. You just need OEM GM key, no dealer code needed. It is gonna be so much cheaper way.<\/p>\n

\"\"<\/p>\n

The GM adapter is compatible with the following new GM models:<\/strong><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Brand<\/b><\/strong><\/td>\nModel<\/b><\/strong><\/td>\nYear<\/b><\/strong><\/td>\n<\/tr>\n
Cadillac<\/td>\nEscalade<\/td>\n2021<\/td>\n<\/tr>\n
CT4<\/td>\n<\/tr>\n
CT5<\/td>\n2020<\/td>\n<\/tr>\n
Chevrolet<\/td>\nTRAX\/TRACKER(4A)<\/td>\n<\/tr>\n
CAVALIER\/ONIX(4A)<\/td>\n<\/tr>\n
Tahoe<\/td>\n2021<\/td>\n<\/tr>\n
Silverado<\/td>\n<\/tr>\n
Suburban<\/td>\n<\/tr>\n
GMC<\/td>\nYukon<\/td>\n<\/tr>\n
Sierra<\/td>\n<\/tr>\n
Denali<\/td>\n<\/tr>\n
Buick<\/td>\nEnvision<\/td>\n<\/tr>\n
GL8(LSY)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Let\u2019s get started.<\/strong>
\nGet right into IMMO to start programming this new OEM key proximity for this vehicle.
\nBefore you start, connect x300dp plus to WiFI, constantly available Hotspot or Local signal. Online calculation requires network connection.
\nGo to update make sure you have both gm data as well as the gm IMMO software V33.24 or above.<\/p>\n

\"\"
\n\"\"
\n\"\"<\/p>\n

Connect CAN FD adapter to the OBDB port using OBD cable and OBDII cable
\nSelect IMMO, then under American\u2019s GM and GM V33.30<\/p>\n

\"\"
\n\"\"
\n\"\"
\n\"\"
\n\"\"
\n\"\"
\n\"\"
\n\"\"<\/p>\n

Next, select Program keys \u2013 GMC \u2013 USA Canada \u2013 Yukon \u2013 Proximity \u2013 2021 \u2013 Without Pin Code \u2013 All Keys Lost<\/p>\n

Choose Enter to erase all the keys on the system
\nEnsure CAN FD GM adapter is in place to continue
\nPress the Push to Start button continually or open and close door every 10 seconds during communication<\/p>\n

\"\"<\/p>\n

The system is searching the key
\nThis keeps anti-theft from locking the system and canceling the process.<\/p>\n

\"\"<\/p>\n

Once accessories and Dash light up, you have entered the anti-theft system.
\n10 minutes wait mandatory<\/p>\n

\"\"<\/p>\n

after 10 minutes theft deterrent system will be deactivated.confirm old key deletion and continue to add new keys now we start to add new key to the system.program new key 1 of 2 into Vehicle signal coil located in the Control driver cup holder<\/p>\n

\"\"<\/p>\n

On screen read \u201cReady for Key 1\u201d, press Push to start button for 2 seconds to add key<\/p>\n

\"\"<\/p>\n

When screen reads \u201cReady for Key 2\u201d, replace key 1 and press Push to start button for 2 seconds to add key<\/p>\n

\"\"<\/p>\n

When screen reads \u201cReady for Key 3\u201d,all keys are programmed, you can exit the system.<\/p>\n

\"\"<\/p>\n

confirm desired key number and exit<\/p>\n

\"\"<\/p>\n

once the system configures, press and hold Start-Stop button 16 seconds to close key learning<\/p>\n

\"\"<\/p>\n

Key learning complete
\nTurn off ignition switch, open and close door just once.<\/p>\n

\"\"
\n\"\"<\/p>\n

when the loading car is completed, the system is fully closed.
\nThen test all key buttons, functions and prox start.
\nAll working. This is a super easy and cheap way to get it done.<\/p>\n","protected":false},"excerpt":{"rendered":"

The least expensive way to program new proximity on this 2021 GMC YUKON when all keys lost should be OBDSTAR<\/p>\n","protected":false},"author":1,"featured_media":13950,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[11,2582,1423],"tags":[1644,1645,1643,1012,1013,1835,1464,1739,1646,2075],"views":2164,"_links":{"self":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts\/13927"}],"collection":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/comments?post=13927"}],"version-history":[{"count":1,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts\/13927\/revisions"}],"predecessor-version":[{"id":13951,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts\/13927\/revisions\/13951"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/media\/13950"}],"wp:attachment":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/media?parent=13927"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/categories?post=13927"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/tags?post=13927"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}