\n
![\"1\"](\"http:\/\/www.obd2tool.com\/blog\/wp-content\/uploads\/2017\/06\/11.png\")
<\/a> <\/p>\n2. If you encounter the following error information, the software is not fully installed. The correct operation is shown below, and the system will be installed automatically. Don’t click “installing” with your hands.<\/p>\n If you click “installing”, the installation will stop.<\/p>\n Then you need to delete the APP and the software and reinstall it.<\/p>\n 3. The methods to remove software are as follows:<\/p>\n <1> You have to connect your phone with computer <2> Remove the cnlaunch folder from your phone. The most important point is software can install automatically. Cannot be clicked ” installing ” during software installation.<\/p>\n 4.The language of your phone must correspond to your software language. If your phone’s language is different from the software language, it will cause the software fail to install.<\/p>\n 5. If you encounter the following problem, it is also because the software is not installed. So there will be two versions of the software. <1> You have to connect your phone with computer
\n<\/a>
\nWhen the software download is complete, please do not click “installing” on the image as below. The system will be installed automatically. No human operation is required.
\nIf you click “installing”, the software will stop installing and it will not work properly.
\n<\/a>
\n<\/a> <\/p>\n<\/a> <\/p>\n<\/a><\/p>\n
\n<\/a><\/p>\n
\n<3> Delete “EZdiag<\/a>” APP.
\n<4> Reinstall “EZdiag” APP and follow step 2 to download each car software and special function. <\/p>\n
\n<\/a><\/p>\n
\n<\/a>
\n<2> Remove the cnlaunch folder from your phone.
\n<3> Delete “EZdiag” APP.
\n<4> Reinstall “EZdiag” APP and follow step 2 to download each car software and special function. <\/p>\n