{"id":18749,"date":"2023-01-06T16:02:06","date_gmt":"2023-01-06T16:02:06","guid":{"rendered":"https:\/\/www.obd2tool.com\/blog\/?p=18749"},"modified":"2023-01-16T16:03:33","modified_gmt":"2023-01-16T16:03:33","slug":"how-to-flash-programming-with-witech-2","status":"publish","type":"post","link":"https:\/\/www.obd2tool.com\/blog\/how-to-flash-programming-with-witech-2\/","title":{"rendered":"How to Flash Programming with wiTECH 2"},"content":{"rendered":"

Flash programming using wiTECH 2.0 software, connect the Micropod II interface to OBD II \/ DLC port in the car. wiTECH 2 will start to identify the vehicle based on VIN and the installed components in the vehicle network, which will bring up the network topology.<\/p>\n

In this document, we will explain how to do flash programming using witech Micropod 2<\/a>. Once your vehicle’s all set up to flash, don’t forget to connect the external battery maintainer. For this test, we have in our programming bay a 2018 Dodge RAM 1500 PICKUP 5.7L HEMI.<\/p>\n

\"\"<\/p>\n

Once the Micropod II identified in wiTECH 2 click anywhere in the gray box area,\u00a0it’ll bring up the network topology. Click on the tab “All Flashes” at the top\u00a0bring up the only flash that’s available for this car. Right side there’s an arrow select\u00a0that,\u00a0and it’ll bring you to the module flashing screen, where you’ll want to click on the consent checkbox. Selecting that you understand that\u00a0you’re flashing will ask you to select a category of why this particular vehicle needs to flash, I choose Service Information\/documentation led to re-flash the component. This car has a check engine light that meets a flash so we’ll type in the box flash for drivability issue as per Technical Service Bulletin TSB, and you’ll click Flash ECU button.<\/p>\n

\"\"<\/p>\n

You will need to login to Techauthority for aftermarket or if you have wiTECH 2 account from FCA dealer, use your DealerConnect account and then the\u00a0flash process starts.<\/p>\n

\"\"<\/p>\n

Next screen will show initialing and finalizing the flash process this will take a few minutes and\u00a0it says complete and gives old and\u00a0new calibration numbers, now click on View DTC’s click clear what DTC to clear after every module flash.<\/p>\n

If we go back over\u00a0the topology seeing no codes no flash lightning bolt
\nsays it’s up to date gives our calibration part number shows our TSB’s.
\nThat is a document for the flash, but now it’s complete.<\/p>\n

After the PCM reflash go to the Restore Vehicle configuration do a restore, this will finalize the flash process on a\u00a0Chrysler wiTECH 2.0<\/p>\n

WCM – Wireless Control Module<\/p>\n

PCM – Powertrain Control Module<\/p>\n","protected":false},"excerpt":{"rendered":"

Flash programming using wiTECH 2.0 software, connect the Micropod II interface to OBD II \/ DLC port in the car.<\/p>\n","protected":false},"author":1,"featured_media":18750,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[2304],"tags":[1893,523,1888,625,1469,1891,1892,524,1890,1889],"views":3578,"_links":{"self":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts\/18749"}],"collection":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/comments?post=18749"}],"version-history":[{"count":1,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts\/18749\/revisions"}],"predecessor-version":[{"id":18753,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts\/18749\/revisions\/18753"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/media\/18750"}],"wp:attachment":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/media?parent=18749"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/categories?post=18749"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/tags?post=18749"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}