{"id":19660,"date":"2025-08-13T07:13:21","date_gmt":"2025-08-13T07:13:21","guid":{"rendered":"https:\/\/www.obd2tool.com\/blog\/?p=19660"},"modified":"2025-12-26T12:31:26","modified_gmt":"2025-12-26T12:31:26","slug":"hino-diagnostic-explorer-dx3-dx2-diagnostic-software-free-download","status":"publish","type":"post","link":"https:\/\/www.obd2tool.com\/blog\/hino-diagnostic-explorer-dx3-dx2-diagnostic-software-free-download\/","title":{"rendered":"2025 HINO Diagnostic Explorer DX3 DX2 Diagnostic Software Free Download"},"content":{"rendered":"

What is HINO DX3 Software?<\/strong><\/p>\n

Hino Diagnostic eXplorer<\/a> 3 (Hino DX3) designed for diagnosing Hino trucks. The program comes with the database (troubleshooting data).The HinoDX2 is used for troubleshooting of the electronic control system and modification of vehicle-specific data Reprogramming of the ECU program.<\/p>\n

Hino Diagnostic Explorer 3 (Hino DX3 v1.25.8) 2025.08 Diagnostic Software<\/strong><\/p>\n

Diagnostic Software<\/strong>
\nMake: Hino
\nRegion:\u00a0\u00a0\u00a0 WorldWide
\nInterface Languages: Multi
\nDatabase Languages: Only English
\ndisks:\u00a0\u00a0\u00a0 287 MB (compressed archive)
\nOS:\u00a0\u00a0\u00a0 Windows 7 32 bit, Windows 7 64 bit, Windows 8\/8.1 32 bit, Windows 8\/8.1 64 bit, Windows 10 32 bit, Windows 10 64 bit, Windows 11 64 bit, Windows 11 Pro 64 bit<\/p>\n

\"\"<\/p>\n

HINO DX3 Diagnostic Software Function List:<\/strong><\/p>\n

Troubleshoot
\nReading DTCs (Diagnostic Trouble Codes)
\nDiagnostic and Troubleshooting workflow
\nCheck and Activation Tests for engine components
\nData Monitor function for recording engine\/system operation<\/p>\n

Customization
\nConfigure user specific features such as
\nIdle Shutdown
\nPTO settings
\nVehicle\/Cruise Speed settings
\nEngine Protection settings
\nMaintenance Intervals
\nEtc\u2026
\nSystem Protection data reset
\nSpecial Learning for new engine components
\nInjector Calibration Codes<\/p>\n

Setting
\nPrint setting
\nCommunication\/Interface setting
\nLanguage setting
\nUnit setting
\nView setting<\/p>\n

Past Work Information
\nDTC reports
\nVehicle Information reports
\nDiagnostic<\/p>\n

HINO DX3 Diagnostic Software Support Regions:<\/strong>
\nAvailable regions \u2013 DEF, JPN, USA, CAN, AUS, CHN, ESP, NZL, COL, CHL, HKG, TWN, GBR, IRL, SGP, THA<\/p>\n

HINO DX3 Diagnostic Software System requirements<\/strong>
\nOperating System: Windows XP \/or Windows 7
\nMicroprocessor: 700MHz Pentium Minimum-best if 2.0 GHz or higher
\nRAM: 128 MB minimum-Recommended 256 MB or higher
\nHard Disk: 20GB free space minimum
\nPC Port: USB
\nDisplay: 1024\u00d7768 pixel minimum
\nInternet Browser: Microsoft Internet Explorer 6.0 or higher<\/p>\n

HINO DX3 Diagnostic Software Support Languages:<\/strong>
\nEnglish, Japanese, Chinese, Spanish, Thai, Russian, French, Indonesian, Vietnamese<\/p>\n

HINO DX3 Diagnostic Software Support OS:<\/strong>
\nWindows 10 , Windows 11 64 bit<\/p>\n

HINO DX2 Diagnostic Software Free Download:<\/strong>
\nHINO DX2 Free Download
\nhttps:\/\/mega.nz\/file\/305DiIRS#cCzCReHop8nQCvzCzmAHUXq0aX90y6T39_FrG9DSPwg<\/p>\n

HINO DX3 Released Note:
\nVer.1.23.1
\n-Updated the database.
\n-Fixed some bugs.
\n-Added language support. (Vietnamese)<\/p>\n

Ver.1.22.12
\n-Updated the database.
\n-Fixed some bugs.<\/p>\n

Ver.1.22.11
\n-Fixed some bugs.<\/p>\n

Ver.1.22.10
\n-Updated the database.
\n-Fixed some bugs.<\/p>\n

Ver.1.22.9
\n-Updated the database.
\n-Fixed some bugs.<\/p>\n

Ver.1.22.8
\n-Updated the database.
\n-Fixed some bugs.<\/p>\n

Ver.1.22.7
\n-Updated the database.
\n-Fixed some bugs.<\/p>\n

Ver.1.22.6
\n-Fixed a bug in the data transmission \/ reception function with the server.<\/p>\n

Ver.1.22.5
\n-Function addition
\nA print function for timeline data (work history) has been added to \u201cSpecial working\u201d.<\/p>\n

Ver.1.22.4
\n-Updated the database.<\/p>\n

Ver.1.22.3
\n-Updated the database.<\/p>\n

Ver.1.22.2
\n-Updated the database.<\/p>\n

Ver.1.22.1
\n-HINO DX\u2162 has been released.<\/p>\n

HINO DX2 Diagnostic Software Update Log:
\nVer.1.1.21.3
\n\u30fbFixed a bug that some print buttons do not work.<\/p>\n

Ver.1.1.21.2
\n\u30fbUpdated 300series EURO6 diagnostic function. Select with the following target vehicles.
\nVehicle classification:300 series Area:EURO6 \u3000Device classification:Engine&DCU, Brake, A\/C<\/p>\n

Ver.1.1.21.1
\n\u30fbUpdated the database.<\/p>\n

Ver.1.1.20.8
\n\u30fbDCU (made by BOSCH)
\nAddition of RPR file download function associated with repro server connection.
\n*You may need to upload the INF file in advance to download the RPR file.<\/p>\n

Ver.1.1.20.7
\n\u30fbUpdated the database.<\/p>\n

Ver.1.1.20.6
\n\u30fbUpdated the database.<\/p>\n

Ver.1.1.20.5
\n\u30fbUpdated the database.<\/p>\n

Ver.1.1.20.4
\n\u30fbFixed the problem that error occurred when reading DTC in some devices.<\/p>\n

Ver.1.1.20.3
\n\u30fbUpdated the database.<\/p>\n

Ver.1.1.20.2
\n\u30fbUpdated the database.<\/p>\n

Ver.1.1.20.1
\n\u30fbUpdated the database.<\/p>\n

Ver.1.1.19.13
\n\u30fb(Driving support) Added the reprogramming function.\/Changed the S\/W part number system.<\/p>\n

Ver.1.1.19.12
\n\u30fb(VCS) Added Initial learning menu \u201cIdentification of speed limiter function\u201d.<\/p>\n

Ver.1.1.19.11
\n\u30fbUpdated the database.<\/p>\n

Ver.1.1.19.10
\n\u30fbUpdated the database.<\/p>\n

Ver.1.1.19.9
\n\u30fbChanged of VCS reprogramming sequence.<\/p>\n

Ver.1.1.19.8
\n\u30fbUpdated the database.<\/p>\n

Ver.1.1.19.7
\n\u30fbUpdated the database.<\/p>\n

Ver.1.1.19.6
\n\u30fb\uff08ZF TraXon AMT\uff09Changed layout of Magnetic valve air leak check screen.<\/p>\n

Ver.1.1.19.5
\n\u30fbUpdated the database.<\/p>\n

Ver.1.1.19.4
\n\u30fbUpdated the database.<\/p>\n

Ver.1.1.19.3
\n\u30fbUpdated the database.<\/p>\n

Ver.1.1.19.2
\n\u30fbUpdated the database.<\/p>\n

Ver.1.1.19.1
\n\u30fb(DCU) Changed of DTC display method.
\n\u30fbUpdated the database.<\/p>\n

Ver.1.1.18.17
\n\u30fb(HV, AMT) Updated diagnostic function.<\/p>\n

Ver.1.1.18.16
\n\u30fb(Driving support) Changed of Diag history output method of \u201cAdjustment of millimeter-wave radar beam axis\u201d.<\/p>\n

Ver.1.1.18.15
\n\u30fb(DCU) Added display function of past failure code.
\n\u30fb(WABCO Air suspension) Updated Diagnosis function and Initial learning.
\n\u30fb(HV) Updated Diagnosis function.<\/p>\n

Ver.1.1.18.14
\n\u30fbChanged the specification of Reprogramming.<\/p>\n

Ver.1.1.18.13
\n\u30fbUpdated the database.<\/p>\n

Ver.1.1.18.12
\n\u30fbUpdated the database.<\/p>\n

Ver.1.1.18.11
\n\u30fbUpdated the database.<\/p>\n

Ver.1.1.18.10
\n\u30fbFixed Initial setting\/Initial learning of Air suspension.<\/p>\n

Ver.1.1.18.9
\n\u30fbUpdated the database.<\/p>\n

Ver.1.1.18.8
\n\u30fbFixed display bug in Data monitor.
\n\u30fbUpdated the database.<\/p>\n

Ver.1.1.18.7
\n\u30fbFixed display bug in Data monitor.<\/p>\n

Ver.1.1.18.6
\n\u30fbFixed bug in data creation for Troubleshooting report.
\n\u30fbChanged the layout of part of Troubleshooting report.<\/p>\n

Ver.1.1.18.5
\n\u30fbFixed reading error of Signal information file of Data monitor.<\/p>\n

Ver.1.1.18.4
\n\u30fbUpdated the database.<\/p>\n

Ver.1.1.18.3
\n\u30fbFixed a problem that communication error occurs when writing Initial setting in some equipment.<\/p>\n

Ver.1.1.18.2
\n\u30fbUpdated the database.<\/p>\n

Ver.1.1.18.1
\n\u30fbUpdated the database.<\/p>\n

Ver.1.1.17.14
\n\u30fbExpansion of Reprogramming function.
\n\u30fbUpdated the database.<\/p>\n

Ver.1.1.17.13
\n\u30fbVersion information of DXII is added to Troubleshooting report.
\n\u30fbSupplementary explanation is added to Troubleshooting report of Failed Report.
\n\u30fbExtended Reprogramming function. (Partial change of sequence etc.)<\/p>\n

Ver.1.1.17.12
\n\u30fbChanged of inf file creation function.
\n\u30fbChanged the rereading method of Delete all (DTC).<\/p>\n

Ver.1.1.17.11
\n\u30fbUpdated the database.
\n\u30fbChanged the Reprogramming function.<\/p>\n

Ver.1.1.17.10
\n\u30fbChanged of inf file creation method.<\/p>\n

Ver.1.1.17.9
\n\u30fbChanged of inf file creation method.
\n\u30fbExpansion of Reprogramming function.<\/p>\n

Ver.1.1.17.8
\n\u30fbUpdated the database.
\n\u30fbChanged the inspection function.<\/p>\n

Ver.1.1.17.7
\n\u30fbExpansion of Reprogramming function.<\/p>\n

Ver.1.1.17.6
\n\u30fbUpdated the database.<\/p>\n

Ver.1.1.17.5
\n\u30fbUpdated the database.
\n\u30fbChanged the inspection function.<\/p>\n

Ver.1.1.17.4
\n\u30fbChanged login ID selection function (add delete button).
\n\u30fbChanged the display method of the help button on Customization window etc.<\/p>\n

Ver.1.1.17.3
\n\u30fbChanged of graph display processing of Data monitor.
\n\u30fbChanged the inspection function.<\/p>\n

Ver.1.1.17.2
\n\u30fbUpdated the database.
\n\u30fbChanged the inspection function.<\/p>\n

Ver.1.1.17.1
\n\u30fbUpdated the database.
\n\u30fbChanged the inspection function.<\/p>\n

Ver.1.1.16.10
\n\u30fbChanged the reading function using QR code reader in \u201cInjector correction\u201d.
\n\u30fbChanged of offline use function.<\/p>\n

Ver.1.1.16.9
\n\u30fbChanged of ECU reading process at the time of Reprogramming.<\/p>\n

Ver.1.1.16.8
\n\u30fbChanged the download method of the \u201cHelp file\u201d.
\n\u30fbChanged the check logic at the time of \u201cINF file\u201d upload.
\n\u30fbAdded the display of the \u201cVehicle classification\u201d and \u201cSystem classification\u201d to the Reprogramming ECU getting information window.
\n\u30fbAdded a User ID selection function at the login screen.
\n\u30fbAdded the \u201cOBD Rate Monitor\u201d in the Past work information print setting window.<\/p>\n

Ver.1.1.16.7
\n\u30fbChanged logic to the judging whether Reprogramming is executable.<\/p>\n

Ver.1.1.16.6
\n\u30fbUpdated the database.
\n\u30fbChanged the inspection function.<\/p>\n

Ver.1.1.16.5
\n\u30fbAdded to the implementation presence or absence of the \u201cDiagnostic flow\u201d to \u201cPast work information\u201d screen.
\n\u30fbAdded the display of the total number and the display number to \u201cPast work information\u201d screen.
\n\u30fbChanged the calculation method of the number of days available in the \u201cOffline\u201d.
\n\u30fbChanged the layout of the \u201cRead DTC window\u201d.
\n\u30fbAdded the \u201cCommunication interface information\u201d in the header part of the \u201cTroubleshooting report\u201d.
\n\u30fbIn the middle of \u201cInspection\u201d can no longer move to the other tabs.
\n\u30fbChanged the Reprogramming specifications for ABS of \u201c300 series\u201d.<\/p>\n

Ver.1.1.16.4
\n\u30fbChanged the display method of List of past work information window.
\n\u30fbChanged the check conditions of the \u201cengine machine number\u201d.
\n\u30fbChanged the upload process of the inf file.<\/p>\n

Ver.1.1.16.3
\n\u30fbModernized the database.
\n\u30fbStreamlined the internal processing.<\/p>\n

Ver.1.1.16.2
\n\u30fbAdded the output function of the Diagnostic flow result.
\n\u30fbAdded the display of the number of searches in Import past work information window.<\/p>\n

Ver.1.1.16.1
\n\u30fbChanged the display method of Special working menu.
\n\u30fbChanged some of the display method of Freeze frame data about Transmission.<\/p>\n

Ver.1.1.15.18
\n\u30fbChanged the time correction process at the time of Login.
\n\u30fbAdded a history list of uploaded files.<\/p>\n

Ver.1.1.15.17
\n\u30fbChanged the conditions to upload the INF file.
\n\u30fbChanged the check window of Batch writing of Customization item.<\/p>\n

Ver.1.1.15.16
\n\u30fbChanged the method of \u201cRead out all \/ Update all\u201d.<\/p>\n

Ver.1.1.15.15
\n\u30fbChanged of Freeze frame data display system.<\/p>\n

Ver.1.1.15.14
\n\u30fbAt Reprogramming screen, changed the button to select how to get Reprogramming file.
\n\u30fbChanged the display method of the active button.
\n\u30fbChanged the display order of the signal list. (Select items for data monitor window, Freeze frame data window, Select active test items window, Device specification, Customization, Learned Value, System protection data).<\/p>\n

Ver.1.1.15.13
\n\u30fbChanged of Import past work information window.
\nChanged how to specify Work date.
\nChanged how to find VIN.
\n\u30fbChanged the creation method of Past work information of Reprogramming.<\/p>\n

Ver.1.1.15.12
\n\u30fbChanged the method of switching display language at Login window.
\n\u30fbExpanded the light bulb mark display function, which means Reprogramming subject.<\/p>\n

Ver.1.1.15.11
\n\u30fbAdded ability to search for \u201cDiag history\u201d from \u201cWork date\u201d.
\n\u30fbAdded a button to an enlarged view in bulk on the function of \u201cData monitor\u201d.
\n\u30fbChanged the header information of the various reports.
\n\u30fbChanged the progress display screen of Diagnostic flow.
\n\u30fbAdded an expiration date display of the password.
\n\u30fbAdded simulation dedicated shortcut.<\/p>\n

Ver.1.1.15.10
\n\u30fbAdded the search function of Location information and Schematic in the menu bar.
\n\u30fbAdd Customization Number to Troubleshooting report.<\/p>\n

Ver.1.1.15.9
\n\u30fbWhen choosing the Part number of the engine in Simulation, changed so that it can be filtered by the Engine model.<\/p>\n

Ver.1.1.15.8
\n\u30fbAdded \u201cmBar\u201d to pressure units.
\n\u30fbAdded a progress display of up to open the \u201cImport past work information window\u201d.
\n\u30fbAdded a progress bar of the \u201cApplication download window\u201d, content relocation.<\/p>\n

Ver.1.1.15.7
\n\u30fbAdded the ability to display the Diagnostic flow (HTML) of DX in Diagnostic flow screen.
\n\u30fbAdded the ability to see in the video the DX2 operation of.
\n\u30fbAdded the ability to synchronize the Data monitor template.
\n\u30fbChanged the caution screen to display when carrying out the Reprogramming.<\/p>\n

Ver.1.1.15.6
\n\u30fbChanged of signal enlarged display function at the time of Data monitor.
\n\u30fbChanged of inf file creation method.<\/p>\n

Ver.1.1.15.5
\n\u30fbChanged the setting method of character size of the screen.
\n\u30fbChanged the display method and printing method in the case that contains the long wording to Data monitor screen.
\n\u30fbChanged the progress screen at the time of version-up of DX2.
\n\u30fbChanged shortcut folder name of the DX2.<\/p>\n

Ver.1.1.15.4
\n\u30fbChanged the display conditions of Vehicle classification.
\n\u30fbAdded AMT to \u201cReprograming\u201d of 300 series.
\n\u30fbChanged the display conditions of \u201cCustomization\u201d screen.<\/p>\n

Ver.1.1.15.3
\n\u30fbChange to be able to scroll through the description of \u201cYes \/ No\u201d of a diagnostic flow screen.
\n\u30fbIf a button or tab title can not be displayed all, to display the full text by the movement of the mouse.
\n\u30fbChange of content relocation scheme.
\n\u30fbIf the VIN can not be acquired, it displays the VIN input screen to diagnosis and customization.<\/p>\n

Ver.1.1.15.2
\n\u30fbChange acquired data of work history.<\/p>\n

Ver.1.1.15.1
\n\u30fbWithout using a diagnostic function was modified to be created by reading the INF file from ECU.
\n\u30fbIn the Data monitor function, etc., change the screen transition at the time of reading and erasing trouble code.
\n\u30fbChange the initial display state of \u201cSave target selection screen\u201d in the Customization.
\n\u30fbChange method of acquiring \u201cWhat\u2019s New GSPS\u201d and \u201cSystem Announce\u201d.
\n\u30fbA display signal selected by the Data monitor was changed to be displayed again after the screen transition.<\/p>\n

Ver.1.1.14.34
\n\u30fbAdd a link function to help document for customization.
\n\u30fbChange of the injector writing function.
\n\u30fbChange of inf file creation method.<\/p>\n

Ver.1.1.14.33
\n\u30fbIn the Inspection Menu window and Initial setting\/Initial learning window, change the system at the time of screen display switching.
\n\u30fbChange of Release notes printing function.
\n\u30fbAdd a link from the Help screen(Signal Description window) to help document (HTML) for Customization.
\n\u30fbUpdated the work guidance of Constant writing auto leveling.<\/p>\n

Ver.1.1.14.32
\n\u30fbImproved end processing of \u201cDEF solution addition test\u201d.
\n\u30fbChange the display message of \u201cDifference learning after pump replacement\u201d.
\n\u30fbRemove \u201cCommon rail pressure\u201d, \u201cOil pressure\u201d from the unit setting screen.
\n\u30fbImprovement of \u201cPast work information print(Diagnostic flow)\u201d.
\n\u30fbFor multiple ECU, adding a continuous run function of Reprogramming.
\n\u30fbImproved caution message display method of Reprogramming.
\n\u30fbChange the representation of the Print button on the display screen part of Reprogramming.<\/p>\n

Ver.1.1.14.31
\n\u30fbUpdated the work guidance of Headlight auto leveling
\n\u30fbImproved provision processing of diagnostic flow corresponding to the ECU<\/p>\n

Ver.1.1.14.30
\n\u30fbAdded the ability to output messages to reset when performing an active test.
\n\u30fbDuring the diagnosis, it is changed to allow transition to another device, \u201cdiagnostic flow\u201d and \u201cData monitor\u201d.
\n\u30fbAdded the display screen of the part number at the end of the Reprogramming.
\n\u30fbChanged the inspection end processing of \u201cPCS operation check\u201d.<\/p>\n

Ver.1.1.14.29
\n\u30fbAdd Item ID to \u201cCustomization\u201d, \u201cActive test\u201d, \u201cData monitor\u201d, \u201cFreeze frame\u201d.
\n\u30fbExpansion of key operating functions.
\n\u30fbFixed a bug that selection combo box of the setting values ??are not displayed in \u201cActive test\u201d.
\n\u30fbChange the display logic of light-icon which is the reprogramming subject.
\n\u30fbChange the notation of diagnostic flow part of the \u201cPast work information\u201d.
\n\u30fbChange the logic of if it goes offline while downloading rpr file.<\/p>\n

Ver.1.1.14.28
\n\u30fbChanged the part number check method of Reprogramming.
\n\u30fbChanged the check function when creating the inf file in Reprogramming.<\/p>\n

Ver.1.1.14.27
\n\u30fbChanged the reading method of \u201cHeadlight auto leveling\u201d.
\n\u30fbChanged processing at the end of DX2.<\/p>\n

Ver.1.1.14.26
\n\u30fbChanged the new registration function of immobilizer.
\n\u30fbChanged the printing process in the \u201cData Monitor comparison\u201d screen.
\n\u30fbAdded checking inf file when creating the reprogramming of VCS ECU.
\n\u30fbAdded new rpr file of BCU.<\/p>\n

Ver1.1.14.25
\n\u30fbFixed a bug when creating Diag History.
\n\u30fbFixed value display problem on a graph of data monitor.
\n\u30fbFixed the display of the progress bar when reprogramming the AMT.
\n\u30fbFixed a bug of display tab control that occurs when switching language.
\n\u30fbChange the retry message when reprogramming the AMT.<\/p>\n

Ver1.1.14.24
\n\u30fbFixed an INF file creation bug when the user cancels the Repro.
\n\u30fbChanged an error when part number was not registered in Reprogramming.
\n\u30fbChanged the screen of \u201cVSC\u201d learning.
\n\u30fbChanged the download policy for \u201cWhat\u2019s new\u201d and \u201cSystem Announce\u201d.
\n\u30fbSupports color multiplexing and scaling of the image in the Location information and Schematic.<\/p>\n

Ver1.1.14.23
\n\u30fbEBS lamp initialization function added.
\n\u30fbModified to not lock screen with Reprogramming running.
\n\u30fbAdded the diagnostic data of EURO5.
\n\u30fbChange the policy of display tab.
\n\u30fbFixed the bug that inf file in 300 series cannot upload from special working.
\n\u30fbFixed the bug that engine number dosen\u2019t get.
\n\u30fbFixed the bug that Reprogramming of 1A series Engine.<\/p>\n

Ver1.1.14.22
\n\u30fbEnabled to download RPR files for constant writing.
\n\u30fbCorrected contents of Check Function Menu\/Initial Settings Menu for each ECUs.
\n\u30fbFinishing a work without VIM connected will end up with making Failed Reports.
\n\u30fbModified the judgement condition of DCU\/BCU reprogramming.<\/p>\n

Ver1.1.14.21
\n\u30fbEnabled re-Reprogramming failed ECUs(EPJ Engine ECU).
\n\u30fbFixed the bug that the wrong VIN saved when you had diagnosed N series Engine after J series Engine.
\n\u30fbRemoved the data(at the end of work) from Failed Reports.
\n\u30fbModified to indicate (Failed Report) on Failed Reports in diag history list.
\n\u30fbModified to log BCU event log every time you read BCU.<\/p>\n

Ver1.1.14.20
\n\u30fbAdded Diagnostic Flow data.
\n*Known issue*
\n\u30fbLatest reprogram icons won\u2019t be updated when changing status from offline to online.
\n\u30fbA blank ECU can\u2019t be reprogrammed by using DXII even if it can be reprogrammed by using DX.<\/p>\n

Ver1.1.14.19
\n\u30fbAdded the function to change into online status.
\n\u30fbChanged default value of checkboxes on Reprogramming in case of exchange VCS ECU.
\n\u30fbModified to report diag history information as \u201cFailed Report\u201d when operator changed the car during diagnosis.
\n\u30fbFixed the bug in reprogramming failed ECU(E\/P\/J Engine).
\n\u30fbAdded timeout error screen when failed to download DXII installer.
\n\u30fbFixed the bug sometimes BCU event logs were not saved to diag history.
\n*Known issue*
\n\u30fbLatest reprogram icons won\u2019t be updated when changing status from offline to online.
\n\u30fbA blank ECU can\u2019t be reprogrammed by using DXII even if it can be reprogrammed by using DX.<\/p>\n

Ver1.1.14.18
\n\u30fbFixed bug in 300 series constant writing.
\n\u30fbFixed the contents of INF files created during 300 series constant writing.
\n\u30fbAdded input screen when DXII can\u2019t retrieve VIN from the vehicle during constant writing.
\n\u30fbEnabled making INF files from diag history that contains ABS data only.
\n\u30fbModified adjustment of millimeter-wave radar beam axis.
\n\u30fbModified axle modulator inspection.
\n\u30fbModified pulse EGR inspection.
\n*Known issue*
\n\u30fbA blank ECU can\u2019t be reprogrammed by using DXII even if it can be reprogrammed by using DX.<\/p>\n

Ver1.1.14.17
\n\u30fbFixed the bug the selected status has been released in case returning from another screen in Diag History list.
\n\u30fbBug fixes in BCU event log.
\n-Flame temp value.
\n-couldn\u2019t open .elg files for replaying.
\n\u30fbFixed the bug that INF files created under offline mode has not been uploaded when it comes to online mode.
\n*Known issue*
\n\u30fbA blank ECU can\u2019t be reprogrammed by using DXII even if it can be reprogrammed by using DX.<\/p>\n

Ver1.1.14.16
\n\u30fbBCU Event Log rollbacked to 1.1.14.13 version.
\n*Known issue*
\n\u30fbA blank ECU can\u2019t be reprogrammed by using DXII even if it can be reprogrammed by using DX.<\/p>\n

Ver1.1.14.15
\n\u30fbFixed a bug that have users who can not login.
\n*Known issue*
\n\u30fbA blank ECU can\u2019t be reprogrammed by using DXII even if it can be reprogrammed by using DX.<\/p>\n

Ver1.1.14.14
\n\u30fbFixed the bug in counting pages of diag reports.
\n\u30fbFixed the bug in moving splitter on Main Menu screen.
\n\u30fbChanged criteria of evaluating Engine Number \/ Parts Number before reprogramming.
\n\u30fbFixed the bug in displaying Location information and Schematic.
\n\u30fbFixed the bug when looped from the last process of a Diagnostic Flow.
\n\u30fbChanged the timeout of downloading.
\n\u30fbModified BCU Event Log.
\n\u30fbModified the method of calculating TR Hours.
\n\u30fbModified the total number of significant decimal digits of Flame temp.
\n\u30fbUpdating the names of events.
\n*Known issue*
\n\u30fbA blank ECU can\u2019t be reprogrammed by using DXII even if it can be reprogrammed by using DX.<\/p>\n

Ver1.1.14.13
\n\u30fbImproved the checkbox display on Reprogram Screen.
\n\u30fbDiag History that contains BCU Event Log has an indicator \u201c*\u201d on equipment column in Diag History List.
\n\u30fbFixed the bug in auto-reprogramming in case of engine exchange.
\n\u30fbFixed the bug in making INF files from Diag History.
\n*Known issue*
\n\u30fbA blank ECU can\u2019t be reprogrammed by using DXII even if it can be reprogrammed by using DX.<\/p>\n

Ver1.1.14.12
\n\u30fbFixed the bug that can not be obtained DPR exhaust gas temperature in DPR check.
\n\u30fbFixed the bug that can not be acquired monitoring data in Difference learning after pump replacement.
\n*Known issue*
\n\u30fbA blank ECU can\u2019t be reprogrammed by using DXII even if it can be reprogrammed by using DX.<\/p>\n

Ver1.1.14.11
\n\u30fbEnabled minimizing ActiveTest window.
\n\u30fbAdded multiple\/all delete function on Diag History List.
\n\u30fbModified the default language setting.
\n\u30fbModified the URL of the page for changing the password when expired.
\n\u30fbFixed the behavior of hidden check boxes on System Protection Data \/ Learned Value screen.
\n\u30fbFixed a bug in resizing Main Menu screen.
\n*Known issue*
\n\u30fbA blank ECU can\u2019t be reprogrammed by using DXII even if it can be reprogrammed by using DX.<\/p>\n

Ver1.1.14.10
\n\u30fbEnabled copy and paste headers of Diag History Report.
\n*Known issue*
\n\u30fbA blank ECU can\u2019t be reprogrammed by using DXII even if it can be reprogrammed by using DX.<\/p>\n

Ver1.1.14.9
\n\u30fbImplemented the countermeasure against the application down during data monitor.
\n*Known issue*
\n\u30fbA blank ECU can\u2019t be reprogrammed by using DXII even if it can be reprogrammed by using DX.<\/p>\n

Ver1.1.14.8
\n\u30fbFixed a bug that changing MAX\/MIN value in MonitorSignalSetting screen is not reflected.<\/p>\n

Ver1.1.14.7
\n\u30fbFixed a communication problem at the time of Repro.
\n\u30fbIn the repro file selection screen, change only the most recent file to be displayed.<\/p>\n

Ver1.1.14.6
\n\u30fbModified to include the diagnostic history PCS -Optical axis adjustment of laser sensor.
\n\u30fbChanged the wording of the confirmation screen at the time of reset of Learned Value \/ System Protection.
\n\u30fbChanged the title of the Troubleshooting report.
\n\u30fbFixed a bug Repro of vehicle control.<\/p>\n

Ver1.1.14.5
\n\u30fbModified the rules of checking errors in case of making inf files.<\/p>\n

Ver1.1.14.4
\n\u30fbFixed the work history data creation failure<\/p>\n

Ver1.1.14.3
\n\u30fbFixed the bug in resizing \u201cSelect items for datamonitor window\u201d.
\n\u30fbAdded maximize button on \u201cSelect items for datamonitor window\u201d.
\n*Known issue*<\/p>\n

Ver1.1.14.2
\n\u30fbFixed the bug in creating INF files.<\/p>\n

*Known issue*
\n\u30fbBug in resizing \u201cSelect items for datamonitor window\u201d screen.(Trigger configuration button won\u2019t move to the correct position.)
\n\u30fbThere is no maximize button in \u201cSelect items for datamonitor window\u201d screen.<\/p>\n

Ver1.1.14.1
\n\u30fbModified check function of PCS -Optical axis adjustment of laser sensor.
\n\u30fbDisplay red-light-icon on the unit that must be reprogrammed.
\n\u30fbModified the calculation of mileage(Mile or kilometer) in diag history.
\n\u30fbAdded the unit sign to the right of the value of mileage.
\n\u30fbReflected the number of significant figures to MAX\/MIN in Data Monitor.
\n\u30fbFixed the bug in relocation.(Application down)
\n*Known issue*<\/p>\n

Ver1.1.13.26
\n\u30fbAdded System Announce to Main Menu.
\n\u30fbModified to display Software Number before downloading rpr files.(only in special functions menu)
\n\u30fbModified to choose \u201cECU program Update\u201d as default.
\n\u30fbFixed the bug that screen shot doesn\u2019t fetch the lines user had written in case of Windows(English ver).
\n\u30fbAdded maximize button on List of past work information screen.
\n*Known issue*
\nUnit of mileage (Mile or Kilometer) is incorrect in diag history.<\/p>\n

Ver1.1.13.25
\n\u30fbFixed a problem when you cut and paste injector correction
\n\u30fbFixed bug in page number of print customized
\n\u30fbDisplay the caution message of continuous run at the time of Manual forced regeneration of DPR check
\n\u30fbChanged the selection method of saving customization<\/p>\n

Ver1.1.13.24
\n\u30fbFixed the bug in displaying check-boxes on lists of customize menu.
\n\u30fbEnabled skipping key on-off count down during reprogramming simulation.
\n\u30fbFixed bug in screen shot tool in case of Windows XP.
\n\u30fbFixed the eraser to work properly.
\n\u30fbFixed the bug that screen shot doesn\u2019t fetch the lines user had written.
\n\u30fbModified the DTC classification of immobilizer to Active\/Inactive.
\n\u30fbFixed the bug in \u201cProportional relay valve inspection\u201d and \u201cTrailer control valve inspection\u201d.(check functions of EBS)<\/p>\n

Ver1.1.13.23
\n\u30fbFixed the bug that the screen shot tool doesn\u2019t fetch DX2 screen .(instead, it had painted gray.)
\n\u30fbFixed the bug that DX2 had reported freeze frame data during auto-updating DTCs.
\n\u30fbFixed the bug that DX2 had retrieved and reported the wrong parts number after reprogramming.
\n\u30fbFixed the bug in Immobilizer setting.<\/p>\n

Ver1.1.13.22
\n\u30fbImproved printing work information reports.
\n\u30fbModified to display items on a new line If they can\u2019t be displayed in one line.
\n\u30fbModified not to report datamonitor settings repeatedly in case of check function.
\n\u30fbIf communication between DX2 and ECU can\u2019t be established during the process of creating and reporting inf file after reprogramming, DX2 prompts a dialog to warn it.
\n\u30fbIf VIN or engine number was not retrieved during the process of creating inf file, DX2 will not upload it.
\n\u30fbRemoved the process of adjusting PC system time. Instead, DX2 display the difference between PC and server time.
\n\u30fbFixed the bug in activation process.
\n\u30fbAdded default datamonitor signal settings files. They are downloaded automatically and displayed as the default selection.
\n\u30fbFixed the bug that the buttons on Learned Value \/ System Protection Data screen can\u2019t be changed language.<\/p>\n

Ver1.1.13.21
\n\u30fbAdded Eraser to the paint tool(DX2 screen shot tools).
\n\u30fbAdded a screen to select which to save to a file, settings of customize category only or of all categories.
\n\u30fbRemoved displaying estimated time for relocation.(gap between estimated time and the real time is too big)
\n\u30fbFixed the bug that DX2 displayed \u201cUpdate completed\u201d though it was not completed yet.
\n\u30fbFixed the bug that contents relocation was not working correctly.
\n\u30fbFixed the bug that DX2 downed when auto-update function was triggered with ECU not read checked.<\/p>\n

Ver1.1.13.20
\n\u30fbAdded \u201cCurrent Work\u201d menu on menu bar to edit current work information.
\n\u30fbModified to display Mileage value when Work Image Info screen opened.
\n\u30fbFixed the bug that a new EBS ECU cannot be reprogrammed.
\n\u30fbModified as to keep the selections of \u201cVehicle classification\u201d and \u201cArea\u201d.<\/p>\n

Ver1.1.13.19
\n\u30fbImproved Reprogramming simulation.
\n\u30fbEnabled DTC setting and DTC search in simulation mode.<\/p>\n

Ver1.1.13.18
\n\u30fbFixed the bug in rpr manual download.
\n\u30fbFixed the bug that offline limit indicator on status bar always displays \u201c1 day\u201d.
\n\u30fbFixed the bug in contents relocation.
\n\u30fbAdded features for factory users.<\/p>\n

Ver1.1.13.17
\n\u30fbFixed the bug that communication error has occurred in case of multi-FFD.
\n\u30fbAdded Manual Update function.
\n\u30fbChanged Contents Relocation during splash screen.
\nNow you can choose to do, or not todo. And you can cancel it on progress.
\n\u30fbModified to apply the effect of changing the size of font to almost all the items on the screen.
\n\u30fbRemoved Unit column from Event Log.<\/p>\n

Ver1.1.13.16
\n\u30fbImproved progress screen on beginning of Check Function.
\n\u30fb300 series DCU reprograminng debut.
\n\u30fb300 series VCS reprogramming debut.
\n\u30fbFixed the bug related to the judging whether reprogramming is executable.
\n\u30fbFixed the bug in printing DTC codes on a diag report.
\n\u30fbChanged the default folder to save BCU event log files.
\n\u30fbFixed the bug in managing files to be uploaded.
\n\u30fbModified the behavior of \u201cReset all DPR items\u201d menu in Check Function.<\/p>\n

Ver1.1.13.15
\n\u30fbAdded \u201cAccelerator sensor adjustment\u201d to CheckFunction menu.
\n\u30fbAdded a shortcut to Monitor folder to File menu.
\n\u30fbChanged the file name of auto-saved event log Files.(added VIN)
\n\u30fbModified to save \u201c.elg\u201d files automatically.
\n\u30fbChanged the method of displaying repro server connection errors on reading out ECU\u2019s.
\n\u30fbFixed the bug in displaying \u201cNew Repro files\u201d icon when multiple ECU\u2019s were read.
\n\u30fbFixed the bug in printing past work information.<\/p>\n

Ver1.1.13.14
\n\u30fbFixed Check Function Menu of 89663-E305\/E306\/E307.
\n\u30fbChanged the method of resizing \u201cImport past work information\u201d screen. Now you can expand it from all corners.
\n\u30fbEnabled changing column width of the grid in \u201cImport past work information\u201d screen.
\n\u30fbAdded trigger function on Data Monitor.
\n\u30fbRemoved \u201cPortal site\u201d menu from menu bar.
\n\u30fbFixed the bug in application download screen.
\n\u30fbRemoved \u201cStandard value\u201d column from Data Monitor grid.
\n\u30fbModified to refresh past work informaiton list only when you imported files or when you opened the screen.
\n\u30fbModified the method of changing the file name of auto-saved Data Monitor File.
\n\u30fbAdded an ECU parts number. E001(BCU)<\/p>\n

Ver1.1.13.13
\n\u30fbFixed the bug in Speed limit setting.
\n\u30fbChanged UI of \u201cImport past work information\u201d . Now you can choose a group\/all groups, a member\/all members.
\n\u30fbModified to remove installer modules except latest two.
\n\u30fbAdded a menu to download repro files manually.<\/p>\n

Ver1.1.13.12
\n\u30fbFixed the bug in DEF solution addition test.<\/p>\n

Ver1.1.13.11
\n\u30fbModified the layout of past work report.(number of digits, date and time, , , etc)
\n\u30fbFixed the bug that it deleted local files when uploading is complete.
\n\u30fbAdded indicator of offline use on status bar.
\n\u30fbModified the unit indicators next to the input fields on diagnostic flows.
\n\u30fbModified to display warning message if you attempted to reprogram with the same program on the ECU.
\n\u30fbFixed the bug that relocation screen remains if you execute the relocation repeatedly.
\n\u30fbChanged the order of downloading. Now it downloads help files first.
\n\u30fbChanged the method of resizing past work information list.
\n\u30fbAdded pop up when retrieving BCU event log is complete.
\n\u30fbFixed the bug that data monitor files are saved to always the same place.<\/p>\n

Ver1.1.13.10
\n\u30fbAdded BCU Event Log data on past work information.
\n\u30fbAdded graph view on BCU Event Log.
\n\u30fbRemoved signals related to Event log from Data Monitor.
\n\u30fbFixed the bug that a wrong PIN wirtten to Info file.
\n\u30fbRemoved Help buttons from customize screens.
\n\u30fbRemoved Repro Server short-cut from menu bar.<\/p>\n

Ver1.1.13.9
\n\u30fbModified the bug that signals over 32bit have unintended RM as for DataMonitor output.
\n\u30fbChanged the default file name of DataMonitor output to \u201cDATA_VIN_YYYYMMDD_HHMM\u201d.
\n\u30fbChanged the behavior of \u201cFinish\u201d button on the Reprogramming screen.
\nNow you directly return to \u201cMain Menu\u201d screen.
\n\u30fbModified the bug that the header parts of work history list allowed double clicking.<\/p>\n

Ver1.1.13.8
\n\u30fbModify Event Log output.
\n\u30fbModified DataMonitor displaying value(grid).
\n\u30fbModified sentences.<\/p>\n

Ver1.1.13.7
\n\u30fbAdded playable dat file to output files of BCU event log .
\n\u30fbAdded \u201cRestart\u201d to the File menu.
\n\u30fbModified \u201cDEF solution addition test\u201d
\n\u30fbAdded \u201cequipment\u201d column to the past work information list.
\n\u30fbNow you can enter OperatorID to import past work information.
\n\u30fbModified sentences.<\/p>\n

Ver1.1.13.6
\n\u30fbSee ver1.1.13.7.<\/p>\n

Ver1.1.13.5
\n\u30fbModified sentences.<\/p>\n

Ver1.1.13.4
\n\u30fbModified diag history PDF output on portal site. The settings of the worker is reflected to them.
\n\u30fbModified DCU reprogramming(added wait).
\n\u30fbModified New-Reprogramming-icon on tree-view.
\n\u30fbImproved the DL\/UL files indicator on the status bar.
\n\u30fbModified the bug on XP-mode.
\n\u30fbModified data monitor output.(not to use the exponent)
\n\u30fbAdded some ECU parts number and Hybrid_14MY component.
\n\u30fbModified the unit settings of some signals.
\n\u30fbModified sentences.<\/p>\n

Ver1.1.13.3
\n\u30fbModified the date of the past work informations.
\n\u30fbNow you can minimize Diagnostic flow window.
\n\u30fbYou can expand the images in Diagnostic- flow in another window by w- clicking\/tapping the images.
\n\u30fbChanged the location of DCU\/BCU rpr files.
\n\u30fbFixed the bug in checking the latest rpr file in Diagnosis.
\n\u30fbFixed the bug there exists the past work informations not being uploaded.<\/p>\n

Ver1.1.13.2
\n\u30fbChanged Monitor \/ BCU Event Log output file format.(same as DX)
\n\u30fbChanged order of Monitor columns.
\n\u30fbAdded print button onto almost every tabs.
\n\u30fbChanged the method of selecting active tests.
\n\u30fbModified what\u2019s new.<\/p>\n

Ver1.1.13.1
\n\u30fbReleased<\/p>\n

DB version<\/p>\n

Ver1.0.0.0
\n\u30fbAdded Diagnostic Flow data.<\/p>\n

Ver2.1.13.0
\n\u30fbAdded ECU type comment column.<\/p>\n

Ver2.4.13.0
\n\u30fbAdded ECU parts number and component.<\/p>\n

Ver2.6.13.0
\n\u30fbAdded Region column to vehicle section.<\/p>\n

Diagnostic Flow version<\/p>\n

Ver1.0.0.0
\n\u30fbAdded Diagnostic Flow data related to 14 Model Year.<\/p>\n","protected":false},"excerpt":{"rendered":"

What is HINO DX3 Software? Hino Diagnostic eXplorer 3 (Hino DX3) designed for diagnosing Hino trucks. The program comes with<\/p>\n","protected":false},"author":1,"featured_media":19661,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[3229],"tags":[3232,3233,3231],"views":8495,"_links":{"self":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts\/19660"}],"collection":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/comments?post=19660"}],"version-history":[{"count":4,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts\/19660\/revisions"}],"predecessor-version":[{"id":23579,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts\/19660\/revisions\/23579"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/media\/19661"}],"wp:attachment":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/media?parent=19660"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/categories?post=19660"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/tags?post=19660"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}