{"id":2641,"date":"2018-08-21T09:02:05","date_gmt":"2018-08-21T09:02:05","guid":{"rendered":"http:\/\/www.obd2tool.com\/blog\/?p=2641"},"modified":"2018-08-21T09:02:05","modified_gmt":"2018-08-21T09:02:05","slug":"how-to-program-a-key-and-correct-odometer-on-audi-q3-2013-with-lonsdor-k518ise-key-programmer","status":"publish","type":"post","link":"https:\/\/www.obd2tool.com\/blog\/how-to-program-a-key-and-correct-odometer-on-audi-q3-2013-with-lonsdor-k518ise-key-programmer\/","title":{"rendered":"How to program a key and correct odometer on Audi Q3 2013 with Lonsdor K518ISE Key programmer?"},"content":{"rendered":"

Lonsdor K518ISE<\/a> Function<\/b><\/strong><\/p>\n

    \n
  1. Backup EPROM: backup car EPROM data;<\/li>\n<\/ol>\n
      \n
    1. Restore EPROM: copy the backed up EPROM data onto the car computer, to restore it to the original state;<\/li>\n<\/ol>\n

      3. Make dealer key: use the backed up EPROM data to write a blank new key to be a dealer key that can be programmed directly;<\/p>\n

        \n
      1. Add key (OBD): use the customized or generated dealer key to directly program key, applicable for the smart card;<\/li>\n<\/ol>\n
          \n
        1. Directly add key: use the customized or generated dealer key to directly program key, applicable for the folding key;<\/li>\n<\/ol>\n
            \n
          1. Delete key: delete the programmed key;<\/li>\n<\/ol>\n
              \n
            1. Reset dashboard<\/li>\n<\/ol>\n
                \n
              1. Odometer adjustment: to correct mileage<\/li>\n<\/ol>\n

                Attention<\/b><\/strong><\/p>\n

                  \n
                1. During all the system operation, the dashboard will be in the extinguished state, that is normal;<\/li>\n
                2. Delete key process:<\/li>\n<\/ol>\n

                  Step 1. Read immodata; Step 2. Select an existing key; Step 3. Write back immodata.<\/p>\n

                  Reference<\/b><\/strong><\/p>\n

                  Chip model: Dedicated 48 chip<\/p>\n

                  Remote type: 220G 315 frequency<\/p>\n

                  Key embryo no.: No.31<\/p>\n

                  PIN code requirement: Backup EPROM data<\/p>\n

                  Remote generation: Program smart key complete, remote will automatically generated<\/p>\n

                  OBD position: Under the steering wheel:<\/p>\n

                  \"\u56fe\u72477\"<\/a><\/p>\n

                   <\/p>\n

                  The car model<\/p>\n

                  \"\u56fe\u72478\"<\/a><\/p>\n

                   <\/p>\n

                  The key<\/p>\n

                  \"\u56fe\u72479\"<\/a><\/p>\n

                   <\/p>\n

                  Operation<\/strong><\/p>\n

                  Backup EPROM<\/strong><\/p>\n

                  1. This function can read the device EPROM data and save in K518ISE;<\/p>\n

                  2. For smart key, please turn off and on the ignition, and then click OK; otherwise click OK directly;<\/p>\n

                  3. The system read out the part number, now is going through security certification, and loading external code;<\/p>\n

                  4. Getting system data, it takes about 2 min, please be patient;<\/p>\n

                  5. Read the vehicle PIN code and other info;<\/p>\n

                  6. Please enter the file name to be saved;<\/p>\n

                  7.EPROM data is saved.<\/p>\n

                  Restore EPROM<\/strong><\/p>\n

                  1. Note: Write the wrong EPROM data may lead to the car can not start, please confirm that the data to be written is the car EPROM data backed up via K518ISE<\/a>;<\/p>\n

                  2. For a smart key, please turn off and on the ignition, and then click OK; otherwise click OK directly;<\/p>\n

                  3. The system read out the part number, now is going through security certification, and loading external code;<\/p>\n

                  4. Please confirm the current data is the car EPROM data;<\/p>\n

                  5. Writing EPROM data, about 2 minutes, please be patient;<\/p>\n

                  6.Resetting the dashboard, EPROM data is restored.<\/p>\n

                  Make dealer key<\/strong><\/p>\n

                  1. This function can generate a dealer key to be programmed, then use this key to perform \u201cAdd key\u201d operation;<\/p>\n

                  2. For a smart key, please turn off and on the ignition, and then click OK; otherwise click OK directly;<\/p>\n

                  3. The system read out the part number, now is going through security certification, and loading external code;<\/p>\n

                  4. Getting system data, it takes about 2 min, please be patient;<\/p>\n

                  5. Please choose to vehicle brand;<\/p>\n

                  6. Please insert the blank key to be programmed into the K518ISE card slot;<\/p>\n

                  7.Make dealer key success.<\/p>\n

                   <\/p>\n

                  Add key (OBD)<\/strong><\/p>\n

                  1. This system is suitable for directly programming smart card dealer key.<\/p>\n

                  Directly add key(suitable for folding dealer key directly programming)<\/p>\n

                  1. This function can directly add a dealer key to the immobilizer system, please put the new key into the coil, and connect the host to the car OBD port;<\/p>\n

                  2. For a smart key, please turn off and on the ignition, and then click OK; otherwise click OK directly;<\/p>\n

                  3. The system read out the part number, now is going through security certification, and loading external code;<\/p>\n

                  4. Getting system data, it takes about 2 min, please be patient;<\/p>\n

                  5. Writing immodata, about 2 minutes, please be patient;<\/p>\n

                  6.Add key complete.
                  \nDelete key<\/strong><\/p>\n

                  1. This function can delete an existing key;<\/p>\n

                  2.The process of this function:<\/p>\n

                  Step 1. Read anti-theft data<\/p>\n

                  Step2. Select an existed key<\/p>\n

                  Step 3. Write back immodata;<\/p>\n

                  3. For a smart key, please turn off and on the ignition, and then click OK; otherwise click OK directly;<\/p>\n

                  4. The system read out the part number, now is going through security certification, and loading external code;<\/p>\n

                  5. Getting system data, it takes about 2 min, please be patient;<\/p>\n

                  6. Please select the key to be deleted;<\/p>\n

                  7.System communicating, delete complete.
                  \nReset dashboard<\/strong><\/p>\n

                  1. Establishing communication, the system is resetting the dashboard;<\/p>\n

                  2.Reset complete.
                  \nOdometer adjustment<\/strong><\/p>\n

                  1. This process can read and calibrate the odometer mileage;<\/p>\n

                  2. if the car is a smart key, please turn off the ignition and then turn on the ignition, and then click OK, otherwise click OK;<\/p>\n

                  3. Read the current mileage;<\/p>\n

                  4. Going through security certification and loading external code, getting data, it takes about 2 minutes;<\/p>\n

                  5. Please enter the new mileage needed to be calibrated ;<\/p>\n

                  6. During writing… write complete.<\/p>\n","protected":false},"excerpt":{"rendered":"

                  Lonsdor K518ISE Function Backup EPROM: backup car EPROM data; Restore EPROM: copy the backed up EPROM data onto the car<\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[11],"tags":[209,844,1016,813,1093,838,973,1032],"views":2002,"_links":{"self":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts\/2641"}],"collection":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/comments?post=2641"}],"version-history":[{"count":1,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts\/2641\/revisions"}],"predecessor-version":[{"id":2645,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts\/2641\/revisions\/2645"}],"wp:attachment":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/media?parent=2641"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/categories?post=2641"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/tags?post=2641"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}