{"id":7893,"date":"2020-02-01T06:21:57","date_gmt":"2020-02-01T06:21:57","guid":{"rendered":"https:\/\/www.obd2tool.com\/blog\/?p=7893"},"modified":"2020-02-06T06:34:15","modified_gmt":"2020-02-06T06:34:15","slug":"toyota-h-chip-all-keys-lost-solution","status":"publish","type":"post","link":"https:\/\/www.obd2tool.com\/blog\/toyota-h-chip-all-keys-lost-solution\/","title":{"rendered":"Toyota H chip all keys lost Solution"},"content":{"rendered":"

Dose anyone knows any device capable of programming keys on regular toyota H chip, when all keys lost situation?<\/p>\n

Many tools can do this.<\/strong><\/p>\n

1. OBDSTAR X300 DP PAD<\/a>
\n2. OBDSTAR X300 PR03<\/a>
\n3. Vxdiag Vcx Nano Techstream<\/a>
\n4. SKP900<\/a>
\n5. Lonsdor K518ISE<\/a>
\n6. OBDSTAR X300 Pro 4<\/a><\/p>\n

1. OBDSTAR X300 DP PAD Do Toyota RAV4 with G ALL Key Lost programming\uff1a<\/strong><\/p>\n

\"\"
\n\"\" \"\" \"\" \"\" \"\"
\n\"\" \"\" \"\" \"\" \"\"<\/p>\n

2. OBDSTAR X300 PR03 Program Toyota H Chip All Key Lost<\/strong><\/p>\n

OBDSTAR X300 DP\/X300 Pro3 key master can do all keys lost for Toyota H chip via OBDII within 3 minutes, fast and easy. (mainly for Toyota with America and middle east standard).<\/p>\n

Here\u2019s the demo guide on programming Toyota H chip all keys lost with X300 Pro3 step-by-step:<\/p>\n

Connect OBDSTAR X300 pro3 host with vehicle via OBD socket<\/p>\n

Turn ignition switch to ON position<\/p>\n

\"\"<\/p>\n

Select Toyota\/Scion\/Lexus->Toyota\/Scion\/Lexus V32.17<\/p>\n

Initializing<\/p>\n

Select Immobilizer->Type 3 (With H 8A\/8E)->select region USA\/Middle East->Reset Immobilizer (All key lost)<\/p>\n

\"\"<\/p>\n

\"\"<\/p>\n

\"\"<\/p>\n

\"\"<\/p>\n

Please make sure the doors stay open during the programming procedure<\/p>\n

\"\"<\/p>\n

Turn ignition off and turn it on again<\/p>\n

\"\"<\/p>\n

\"\"<\/p>\n

\"\"<\/p>\n

Turn ignition off and remove the key<\/p>\n

\"\"<\/p>\n

Configuring the system\u2026<\/p>\n

Switch ignition on<\/p>\n

program key in progress<\/p>\n

Turn ignition off and remove key<\/p>\n

\"\"<\/p>\n

Program keys as the following steps:<\/p>\n

Program 2 master keys and 1 sub keys
\n1)Insert the first master key, turn on the ignition and wait for 5 seconds
\n2)Insert the second master key, turn ignition on and wait for 5 seconds<\/p>\n

\"\"<\/p>\n

\"\"<\/p>\n

\"\"<\/p>\n

Program H chip key success<\/p>\n

\"\"<\/p>\n

3. Vxdiag Vcx Nano Techstream do Toyota H chip All Keys Lost<\/strong><\/p>\n

Toyota H chip all keys lost with Toyota Techstream, how to do? Here is the step-by-step instruction for you. Wish it helps.<\/p>\n

First you should buy a Toyota OEM Standard Transponder Key : H Chip (Non-Valet) \/ 89785-0D 170 \/ TOY 44H. Because it is frequent that non original Toyota H key sold on Ebay will not work.<\/p>\n

Then the step to follow to pragram (Non-Valet) \/ 89785-0D 170 \/ TOY 44H key on 2014+ Toyota.
\nWith Vxdiag vcx nano for Toyota running Techstream V12.00.127, you need disassemble the immo box for some models<\/p>\n

Disassemble the immo box<\/p>\n

Plug the vxdiag vcx nano Toyota scanner into the OBD2 socket and connect the other end with laptop via USB port<\/p>\n

Inserted the master key and turned the ignition to ON.<\/p>\n

Click on \u201cConnect to Vehicle\u201d<\/p>\n

Connection\u2026.<\/p>\n

select 2WD or 4WD, 4WD of course.<\/p>\n

run a Health Check and the Techstream software was well communicated with all the ECMs for various systems.<\/p>\n

started by programming the remote keyless door lock functions<\/p>\n

chose \u201cMain Body\u201d in \u201cSystem Selection Menu\u201d<\/p>\n

\"\"<\/p>\n

select \u201cUtility\u201d and \u201cWireless Code Registration.\u201d<\/p>\n

\"\"<\/p>\n

Follow the \u201cWireless Code Registration Wizard\u201d popped up windows prompts:<\/p>\n

\"\"<\/p>\n

key programming is complete (took 2 minutes).<\/p>\n

Click on \u201cNext\u201d to program another key or \u201cExit\u201d if finished.<\/p>\n

Now start programming the immobiliser chip so the key would actually start the engine.<\/p>\n

chose \u201cImmobiliser\u201d in \u201cSystem Selection Menu\u201d<\/p>\n

\"\"<\/p>\n

Select \u201cImmobiliser Live\u201d tab appeared<\/p>\n

click on \u201cUtility\u201d and \u201cKey Registration\u201d<\/p>\n

\"\"<\/p>\n

Another wizard popped up\u2026turn the ignition off, then back on and next. Then it asked me to turn it back off, remove the master key, insert the new key and next.<\/p>\n

The security light started flashing, as a timer on the screen counted down from about 90 seconds while the ECU learned the new key code. Once the counter got down to zero, it said \u201cProgramming Complete\u201d and showed a \u201cNext\u201d and \u201cExit\u201d button as before. Then tested the key, started the engine, locked\/unlocked the doors and it all worked perfectly.<\/p>\n

4. SuperOBD SKP-900 Key Programmer Toyota All Keys Lost<\/strong><\/p>\n