{"id":8549,"date":"2020-03-11T13:29:11","date_gmt":"2020-03-11T13:29:11","guid":{"rendered":"https:\/\/www.obd2tool.com\/blog\/?p=8549"},"modified":"2021-08-27T04:40:36","modified_gmt":"2021-08-27T04:40:36","slug":"how-to-program-2010-chrysler-town-country-keys-by-autel-im608","status":"publish","type":"post","link":"https:\/\/www.obd2tool.com\/blog\/how-to-program-2010-chrysler-town-country-keys-by-autel-im608\/","title":{"rendered":"How to program 2010 Chrysler Town & Country Keys by Autel IM608"},"content":{"rendered":"

Autel MaxiIM IM608<\/a> can add new key to 2010 Chrysler Town& Country by reading Immobilizer password (CAN). Here share the related guide and Chrysler vehicle coverage supported by IM608.<\/p>\n

\"\"<\/p>\n

Part 1: Guide to add Chrysler key by Autel IM608<\/strong>
\nPart 2: Autel IM608 IMMO Chrysler Vehicle Coverage<\/strong><\/p>\n

Part 1: Guide to add Chrysler key by Autel IM608:<\/strong>
\n1.Connect Autel IM608 key programmer to the Chrysler via OBD
\n2.Enter IM608 main menu<\/p>\n

Auto detect.
\n\"\"<\/p>\n

Auto scan VIN.
\nChrysler (USA).
\n\"\"<\/p>\n

Diagnostic program loading.
\nSmart Mode.
\n\"\"<\/p>\n

3.Pay attention to the information:<\/p>\n

-Turn the ignition on<\/p>\n

-To execute function in \u201cSmart Mode\u201d, please select correct vehicle brand<\/p>\n

-If it is old pre 2006 model, please give priority selection to \u201cManual Selection\u201d or \u201cSystem Selection\u201d!
\n\"\"<\/p>\n

Establishing vehicle communication.<\/p>\n

4.Select “Smart Key”.
\n\"\"<\/p>\n

5.Switch the ignition OFF and then ON again, make sure the engine is off.
\n\"\"<\/p>\n

Establishing vehicle communication.<\/p>\n

6.The password is 3679.
\n\"\"<\/p>\n

7.Select “Read Immobilizer Password (CAN)”.
\n\"\"<\/p>\n

8.Go to “Key Learning” again.
\nTap “OK”
\nEstablishing vehicle communication.
\n\"\"<\/p>\n

\"\"<\/p>\n

Learning failed.
\nI guess I should have the new key there.
\n\"\"<\/p>\n

9.Turn the ignition off and pull out the current key. Insert another key to be programmed, turn the ignition on, and make sure the engine has not been started.
\n\"\"<\/p>\n

10.Establishing vehicle communication.<\/p>\n

Current number of keys is: 3
\nLearning successful.
\n\"\"<\/p>\n

I don’t want to learn the next key, let’s see if it works.
\n\"\"<\/p>\n

This is the new key, and I press the “Unlock button” it can start the car, nice.
\n\"\"<\/p>\n

This is the old key.
\n\"\"<\/p>\n

So. Success. As you can see, you did not need to connect the programmer, you can directly connect Autel IM608 to the Chrysler via OBD.<\/p>\n

Part 2: Autel IM608 IMMO Chrysler Vehicle Coverage:<\/strong><\/p>\n

\n\n\n\n\n\n\n\n\n<\/colgroup>\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Vehicle brand<\/td>\nVehicle model<\/td>\nYear<\/td>\nSystem<\/td>\nFunction<\/td>\nSub-function<\/td>\nVersion<\/td>\n<\/tr>\n
Chrysler<\/td>\n300<\/td>\n2005-2006<\/td>\n\/<\/td>\nRelevant Information<\/td>\n\/<\/td>\nAbove Chrysler_V2.80<\/td>\n<\/tr>\n
Chrysler<\/td>\n300<\/td>\n2005-2006<\/td>\n\/<\/td>\nRead Immobilizer Password<\/td>\n\/<\/td>\nAbove Chrysler_V2.80<\/td>\n<\/tr>\n
Chrysler<\/td>\n300<\/td>\n2005-2006<\/td>\nImmobilizer (CAN)<\/td>\nDTC<\/td>\nClear DTC<\/td>\nAbove Chrysler_V2.80<\/td>\n<\/tr>\n
Chrysler<\/td>\n300<\/td>\n2005-2006<\/td>\nImmobilizer (CAN)<\/td>\nDTC<\/td>\nRead DTC<\/td>\nAbove Chrysler_V2.80<\/td>\n<\/tr>\n
Chrysler<\/td>\n300<\/td>\n2005-2006<\/td>\nImmobilizer (CAN)<\/td>\nECU Configuration<\/td>\n\/<\/td>\nAbove Chrysler_V2.80<\/td>\n<\/tr>\n
Chrysler<\/td>\n300<\/td>\n2005-2006<\/td>\nImmobilizer (CAN)<\/td>\nECU Information<\/td>\n\/<\/td>\nAbove Chrysler_V2.80<\/td>\n<\/tr>\n
Chrysler<\/td>\n300<\/td>\n2005-2006<\/td>\nImmobilizer(CAN)<\/td>\nKey Learning<\/td>\nErase Key<\/td>\nAbove Chrysler_V2.80<\/td>\n<\/tr>\n
Chrysler<\/td>\n300<\/td>\n2005-2006<\/td>\nImmobilizer(CAN)<\/td>\nKey Learning<\/td>\nRemote Learning<\/td>\nAbove Chrysler_V2.80<\/td>\n<\/tr>\n
Chrysler<\/td>\n300<\/td>\n2005-2006<\/td>\nImmobilizer(CAN)<\/td>\nLive Data<\/td>\n\/<\/td>\nAbove Chrysler_V2.80<\/td>\n<\/tr>\n
Chrysler<\/td>\n300<\/td>\n2005-2006<\/td>\nImmobilizer(CAN)<\/td>\nKey Learning<\/td>\nNew Key Learning<\/td>\nAbove Chrysler_V2.80<\/td>\n<\/tr>\n
Chrysler<\/td>\n300<\/td>\n2005-2006<\/td>\nImmobilizer(CAN)<\/td>\nKey Learning<\/td>\nOld Key Learning<\/td>\nAbove Chrysler_V2.80<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

Autel MaxiIM IM608 can add new key to 2010 Chrysler Town& Country by reading Immobilizer password (CAN). Here share the<\/p>\n","protected":false},"author":1,"featured_media":8547,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[98,11],"tags":[1513,1655,1654,1512,1656,1612,365,1609],"views":3112,"_links":{"self":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts\/8549"}],"collection":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/comments?post=8549"}],"version-history":[{"count":20,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts\/8549\/revisions"}],"predecessor-version":[{"id":14448,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts\/8549\/revisions\/14448"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/media\/8547"}],"wp:attachment":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/media?parent=8549"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/categories?post=8549"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/tags?post=8549"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}