{"id":9622,"date":"2020-06-11T06:37:55","date_gmt":"2020-06-11T06:37:55","guid":{"rendered":"https:\/\/www.obd2tool.com\/blog\/?p=9622"},"modified":"2020-06-11T07:24:55","modified_gmt":"2020-06-11T07:24:55","slug":"how-to-build-connection-between-cummins-insite-and-ecmauto-configurerp1210-adapter-and-simulator","status":"publish","type":"post","link":"https:\/\/www.obd2tool.com\/blog\/how-to-build-connection-between-cummins-insite-and-ecmauto-configurerp1210-adapter-and-simulator\/","title":{"rendered":"How to build connection between Cummins Insite and ECM:Auto Configure,RP1210 Adapter and Simulator?"},"content":{"rendered":"

Adding New Connection:<\/b><\/strong><\/p>\n

Click on connection<\/p>\n

Select \u201cAdd New\u2026\u201d<\/p>\n

Dialog box for ECM Connection Wizard should appear as shown.<\/p>\n

\"\"<\/p>\n

\"\"<\/p>\n

Select appropriate connection<\/p>\n

Auto Configure<\/b><\/strong><\/p>\n

Automatically detects installed datalink adapters<\/p>\n

 <\/p>\n

RP1210 Adapters<\/b><\/strong><\/p>\n

Manually configure the datalink adapter connection<\/p>\n

 <\/p>\n

Simulator<\/b><\/strong><\/p>\n

Creates simulated ECM<\/p>\n

environment using virtual port<\/p>\n

Click \u201cNext\u201d to continue.<\/p>\n

\"\"<\/p>\n

Auto Configure<\/b><\/strong><\/p>\n

Auto Configure will automatically detect and connect to an RP1210A compliant adapter that is installed on the PC<\/p>\n

Select Auto Configure and click the Next button<\/p>\n

Ensure that the steps listed in the Instructions have been completed<\/p>\n

Click the Start button<\/p>\n

\"\"<\/p>\n

Auto Configure will attempt to detect and connect to an RP1210A compliant adapter<\/p>\n

This can take several minutes to complete<\/p>\n

To cancel the process, click the Stop button, otherwise let it run until it completes<\/p>\n

\"\"<\/p>\n

Auto Configure process was successful<\/p>\n

Click on the Next button to continue<\/p>\n

Select the desired adapter configuration<\/p>\n

Click on the Next button to continue<\/p>\n

\"\"<\/p>\n

RP1210 Adapters<\/b><\/strong><\/p>\n

Select desired vendor<\/p>\n

Select desired adapterEnsure correct connection type is selected (such as USB, Bluetooth, Wireless, or COM port)<\/p>\n

Select protocolAuto Detect, J1939 or J1708<\/p>\n

If desired, you may click \u201cDatalink Adapter Connection Test\u201d to validate driver installation<\/p>\n

Once successful, click on \u201cNext\u201d to continue<\/p>\n

\"\"<\/p>\n

Simulator<\/b><\/strong><\/p>\n

Simulates connections to all supported engines<\/p>\n

Almost full simulated tool functionality<\/p>\n

Can be used for training or exploring Engine Features without being connected to an Engine<\/p>\n

Data is simulated and does not represent actual engine data<\/p>\n

 <\/p>\n

Classic simulator options available for pre-EPA 2007 engines<\/p>\n

Integrated simulator options available for EPA 2007 and newer engines.<\/p>\n

INSITE Integrated Simulator<\/p>\n

\u2013Multi ModuleSimulates multi-module set up<\/p>\n

INSITE Integrated Simulator<\/p>\n

\u2013Single ModuleS imulates single module set up<\/p>\n

\"\"<\/p>\n

Adding New Connection<\/b><\/strong><\/p>\n

Enter a desired name for the new connection.<\/p>\n

Click \u201cNext\u201d to continue.<\/p>\n

\"\"<\/p>\n

If desired, select corresponding checkbox to make connection active.<\/p>\n

If desired, select corresponding checkbox to setup\/add another connection.<\/p>\n

Click \u201cFinish\u201d<\/p>\n

NOTE:If another connection is not being created and connection is made active, the Connect to ECM dialog box will appear after finish.<\/p>\n

\"\"<\/p>\n

Additional connections or simulators can be added by navigating the Menu BarTools >Options >Connections<\/p>\n

File > Connections >Add New Connection\u2026<\/p>\n

\"\"<\/p>\n

\"\"<\/p>\n

Selecting Connections<\/b><\/strong><\/p>\n

Select connection from dropdown.<\/p>\n

Connect dialog box should appear after selecting desired connection.<\/p>\n

\"\"<\/p>\n

\"\"<\/p>\n

Connecting to ECM<\/b><\/strong><\/p>\n

Use the left View Bar \u201cConnect to ECM\u201d icon<\/p>\n

Click on Tool Bar icon<\/p>\n

From Menu Bar, click on Tools Connect to ECM<\/p>\n

Use keyboard key shortcut Ctrl+E<\/p>\n

IMPORTANT NOTE: Always ensure the desired adapter is selected before attempting to connect to the ECM<\/p>\n

\"\"<\/p>\n

Clicking \u201cConnect\u201d button will start establishing data link connection to ECM.<\/p>\n

\"\"<\/p>\n","protected":false},"excerpt":{"rendered":"

Adding New Connection: Click on connection Select \u201cAdd New\u2026\u201d Dialog box for ECM Connection Wizard should appear as shown. Select<\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[65],"tags":[2008,351,349,1129,1026,422],"views":4924,"_links":{"self":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts\/9622"}],"collection":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/comments?post=9622"}],"version-history":[{"count":3,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts\/9622\/revisions"}],"predecessor-version":[{"id":9644,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/posts\/9622\/revisions\/9644"}],"wp:attachment":[{"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/media?parent=9622"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/categories?post=9622"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.obd2tool.com\/blog\/wp-json\/wp\/v2\/tags?post=9622"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}