{"id":9864,"date":"2020-07-03T10:43:10","date_gmt":"2020-07-03T10:43:10","guid":{"rendered":"https:\/\/www.obd2tool.com\/blog\/?p=9864"},"modified":"2020-07-03T10:43:10","modified_gmt":"2020-07-03T10:43:10","slug":"2018-toyota-camry-cluster-calibration-and-key-programming-by-obdstar-x300-dp-plus","status":"publish","type":"post","link":"https:\/\/www.obd2tool.com\/blog\/2018-toyota-camry-cluster-calibration-and-key-programming-by-obdstar-x300-dp-plus\/","title":{"rendered":"2018 Toyota Camry Cluster Calibration and key programming by OBDSTAR X300 DP PLUS"},"content":{"rendered":"

This article show a guide on how to use OBDSTAR X300 DP PLUS<\/a> to perform all keys lost programming and Cluster Calibration for Toyota 2018,It is tested 100% ok.<\/p>\n

Car models:<\/strong> 2018 Toyota Camry<\/p>\n

\"\"<\/p>\n

Tool:<\/strong> OBDSTAR X300 DP PLUS<\/p>\n

\"\"<\/p>\n

Part 1. OBDSTAR X300 DP Plus program Toyota 88\/8A All Key Lost with simulated card
\nPart 2. 2018 Toyota Camry Cluster Calibration by OBDSTAR X300 DP PLUS<\/p>\n

Part 1. OBDSTAR X300 DP Plus program Toyota 88\/8A All Key Lost with simulated card<\/strong><\/p>\n

Connect OBDSTAR DP Plus (OBDSTAR X300 PAD2)to the Toyota OBD port (Directly charge via the vehicle)
\nPress the \u201cStart\u201d button and you can see the yellow warning light flashes for 3 times (Means detecting no keys).<\/p>\n

\"\"
\n\"\"<\/p>\n

Enter into DP Plus function menu, tap \u201cToyota \/ Scion \/ Lexus\u201d<\/p>\n

\"\"<\/p>\n

Initializing MCU data
\nLoading
\nVCI is upgrading.. (VCI is built-in)
\nInitializing
\nLoading
\nInitializing diagnostic data
\nAuthorizing\u2026
\n* 5 seconds done\u2026 DP plus is running fast
\nTap \u201cSmart key system\u201d<\/p>\n

\"\"<\/p>\n

\"\"<\/p>\n

Tap \u201cType 5 (All smart keys lost)\u201d<\/p>\n

\"\"<\/p>\n

Tap \u201cRead eeprom\u201d.<\/p>\n

\"\"<\/p>\n

Read in on-screen guide :<\/p>\n

This function can read (backup) vehicle EEPROM data;
\nAfter read (backup) of vehicle eeprom data, the simulated card is generated with this data;
\nUsing simulated card attach start button to illuminate instrument, and instead of original car key to [Add smart keys].<\/p>\n

\"\"<\/p>\n

Communicating\u2026
\nReading data\u2026
\nPlease reenter the file name to save.<\/p>\n

\"\"
\n\"\"<\/p>\n

This vehicle EEPROM data backup was successful. Please execute the [Make Simulated Card] function!<\/p>\n

\"\"<\/p>\n

Tap \u201cMake Simulated Card\u201d.<\/p>\n

\"\"<\/p>\n

This function can generate an simulated card with all keys lost.
\nUse this simulated card instead of the original car key to approach the start button and turn on the instrument, and perform the [Add Smart key] operation.
\nMake sure the simulated card is fully charged, otherwise the [Add Smart key] operation may fail.<\/p>\n

\"\"
\n\"\"<\/p>\n

This function is available by connecting the server, please ensure the internet connection is normal.<\/p>\n

\"\"<\/p>\n

Connecting to the server.
\nConnect P001 programmer to diagnostic tool.<\/p>\n

\"\"
\n\"\"<\/p>\n

Put NO.3 simulated card (Red) into P001 programmer.<\/p>\n

\"\"<\/p>\n

Insert the battery and turn on the switch.<\/p>\n

\"\"
\n\"\"<\/p>\n

Put the simulated card (88\/A8 type in Red) into P001 programmer.<\/p>\n

\"\"<\/p>\n

Only one seconds later, get message:
\nGenerating simulated card successfully.<\/p>\n

Move the simulated card close to the start button and try to light the meter. If you can light up the meter normally, use the simulated card instead of the original car key for the [Add smart key] operation.<\/p>\n

\"\"
\n\"\"
\n\"\"<\/p>\n

Go on [Add smart key] operation.
\nDone<\/p>\n