• Welcome to obd2tool.com ! [Login],New User? [Join Free]
  • bmw icom a2/ a3/ next/ mb star c3/c4/c5/c6 gm tech2/gm mdi/gm mdi2 porsche piwis 2/piwis 3
    Your Position: Home > Auto Scanner Tools > Other Auto Tools > SKS-3055B Auto Signal Generator of ECU

    ALL CATEGORIES

    New Year Deals

    Auto Scanner Tools

    Mileage Correction

    Auto Key and Locksmith Tools

    Motorcycle Scanner Tool

    All-Sun tools

    Humzor Tools

    Remote Tool

    View History

    SKS-3055B Auto Signal Generator of ECU

    • Item No.  Z151
    • History: 80  sold
    • Quantity
      Total
      Shipping:
      Express Shipping Service    Estimated delivery time: 5-7 days »
      Affected by the epidemic, there will be delays in transit time.
    • Quantity:  Out of stock
    • Weight:  1.0KG
    • Rank:  comment rank 5 () Write a Review
    • Member Benefits  Shipping  Return Policy

    Description

    Attribute

    Review

    Technical Support

    Video


    SKS-3055B Auto Signal Generator of ECU

    Introduction

    SKS-3055B Auto signal generator designed under the rules by the diagnosis of auto electronic control systems and electronic circuit signal characteristics, specifically designed for the auto service technician. This instrument easy to use, supplied with cables for variety sensors. Also have the network support for auto sensors database. Used for Automotive fault diagnosis, ECU repair, EECU teaching fields, etc.


    Ⅱ. Description of the Panel


                       

                  (Fig.1) PanelⅠ                                               (Fig.2)PanelⅡ


     Ⅲ. Instrument Features

    1、Signal Characteristics Adjustment: Adjust the amplitude, frequency, phase, X + Y, waveform and other indicators, while the signal output. This is very convenience for auto ECU repair.
    2、Multi-output signal: Made by high-performance microprocessors, can output 7 signals simultaneously.
    3、Human control interface : By the simple design ideas, 128*64 LCD, Bilingual display, easy to operate.
        

        (Fig.3) Start interface                               

         

        (Fig.4) English main menu


    4、Cables: Supporting common sensor cables, for various models.

    (Fig.5) Basic configuration

    Ⅳ.Function Introduction

    This instrument can simultaneous output sinusoidal, square-wave, X+Y signal, voltage signal, oxygen sensor signal, resistance signal and PWM signal, which includes all the common signal characteristics of automotive sensors.

    1、Sinusoidal signal:
    l1---2KHz Frequency regulation;
    lSignal Single-ended output to ground;

    l5Vpp---18Vpp Amplitude adjustment.


                
     (Fig.6) Sinusoidal interfaceⅠ                  (Fig.7) Sinusoidal interfaceⅡ

    Mainly used for simulate the rotating speed, wheel speed, vehicle speed signals, which was generated by magnetic sensor.

    2、Square-wave Signal:
    l1---20KHz Frequency regulation;
    lSignal Single-ended output to ground;
    l5Vpp---9Vpp Amplitude adjustment.
       
            

    (Fig.8) Square-wave interfaceⅠ            (Fig.9) Square-wave interface Ⅱ


    Used for simulate the rotating speed, wheel speed, camshaft position and air-flow signals, which was generated by Hall sensor and photoelectric sensor.


     


    3、X+Y Signal


    l1---2KHz Frequency regulation;


    l5Vpp---18Vpp Amplitude adjustment;


    l1---60 X+Y signal adjustment.


    l1---3 X+Y signal adjustment.


    l0°、180° Phase position adjustment.


    lX+Y signal outputted by Square-Ground, Sine-Ground and Sine-Couple, easy to simulate various crank signals.


    lSine-wave and Square-wave switched while Signal-Ground output.

                                                  
     (Fig.10)X+Y Signal interfaceⅠ                 (Fig.11)X+Y Signal interface Ⅱ

                                                 
    (Fig.12)X+Y Signal interface Ⅲ              (Fig.13)X+Y Signal interface Ⅳ

    Used for simulate the X+Y signal of Magneto electric, photo electricity and Hall sensors.

    4、Voltage Signal:
    l0---5V Voltage adjustment.
    lOutput voltage precision 0.02V.
    l Signal Single-ended output to ground
           
       
     (Fig.14) Voltage signal interface

    Used for simulate the voltage signal of Throttle Position, MAP and EGR Valve Position Sensors.

    5、Oxygen Sensor Signal:
    lThe 0.1V、0.9V Oxygen ion Dilute and Concentrate can be switched at anytime.
    lSignal Single-ended output to ground


            

         (Fig.15)Oxygen Signal interface

    Used for simulate oxygen ion concentrate signal by kinds of oxygen sensors.


    6、Resistance Signal
    lPrecision Multi-turn pointer potentiometer.

    l0--10K Ten loop output, MIN 22Ω


    Used for output signal of coolant temperature, intake air temperature and temperature sensors. It must be realized by simulate resistance signal.

    7、PWM Signal
    l2 Hz --- 999±1 Hz Frequency can be adjusted independently.
    l1% --- 99%±1% Duty cycle can be adjusted independently.
    lSignal Single-ended output to ground.
    l9Vpp amplitude fixed output.

                                                            
         (Fig.17) PWM Signal interfaceⅠ             (Fig.18) PWM Signal interfaceⅡ

    Used for simulate the ignition control signal, fuel injection control signal, camshaft position signal, EGR control signal and some other pulse signals.

    Ⅴ.Instructions


    1、Power
    Use outlet power, switch leader cable (ACCES.1) into button Nine-pin jack. Use the power line (ACCES.2) can easily connected with 12V car battery; Use stabilized voltage supply, work condition: current greater than 2A, Voltage between 10V-15V. Use 220V/12V power adapter, please NOTE: Current ABOVE 1A, Voltage shall NOT above 15V. Power output plug should match with the instrument. 


    2、Button and Main Menu
                                                                    
             (Fig.19)Main Menu                                          (Fig.20)Buttons


    3、Generation of sinusoidal signal
    After power, choose “Sinusoidal signal”(Fig.19), press “CONFIRM” into Sinusoidal interface(Fig.6),choose “Frequency” and “Amplitude”. 
    lAdjust Frequency: After enter (Fig.6), use “LEFT” and “RIGHT” choose frequency value; use “UP” and “DOWN” choose magnitude. Press CONFIRM after the adjustment.

    lAdjust Amplitude: After enter (Fig.7), use “LEFT” and “RIGHT” choose Sinusoidal signal amplitude; use “UP” and “DOWN” choose range.

    lSignal output: Choose square-wave and Sinusoidal output cables(ACCES.3), the BLUE wire shall generate the Single-ended output to ground Sinusoidal Signal by( Black clamp)

    4、Generation of Square-wave Signal
    After power, choose “Square-wave Signal” (Fig.19), press “CONFIRM” into Square-wave Signal interface (Fig.8), choose “Frequency” and “Amplitude”.

    lAdjust Frequency: After enter (Fig.8), use “LEFT” and “RIGHT” choose frequency value; use “UP” and “DOWN” choose magnitude. Press CONFIRM after the adjustment.

    l Adjust Amplitude: After enter (Fig.9), use “LEFT” and “RIGHT” choose Square-wave Signal amplitude; use “UP” and “DOWN” choose range.
    lSignal output: Choose square-wave and Sinusoidal output cables (ACCES.3), the GREEN wire shall generate the Single-ended output to ground square-wave Signal by Black clamp.

    5、Generation of X+Y Signal
    After power, choose “X+Y Signal” (Fig.19), press “CONFIRM” into X+Y Signal interface (Fig.10), choose “Frequency” “Amplitude” and “Waveform”.

    lAdjust Frequency: Choose “Frequency” into “X+Y Signal Interface” (Fig.10、11、12), use “LEFT” and “RIGHT” choose digit; use “UP” and “DOWN” choose range. Press CONFIRM after the adjustment.

    lAdjust Amplitude: Choose “Amplitude “ into “X+Y signal interface”(Fig.13), use “LEFT” and “RIGHT” choose amplitude; use “UP” and “DOWN” choose range.

    lAdjust Waveform: Choose “ Waveform” into X+Y signal interface (Fig.10、11、12), cursor moves to “58+2”, use “LEFT” and “RIGHT” choose X and Y, use “UP” and “DOWN” choose signal X(1-60) or Y (1-3); According to the actual vehicle signal characteristics, use LEFT button move the cursor to “Sine-Ground”, use “UP” and “DOWN” choose the output form “Sine-Ground” “Sine-Couple” and “Square-wave”. Move cursor to “POS.” use “UP” and “DOWN” chooses “POS.” and “REV.” Also can use the oscillograph to observe the changes of all the signal signature. This feature is suitable for ECU dynamic test.

    Signal Output: Use the X+Y output cables (ACCES.4), choose “Sine-ground”, the GREEN WITH WHITE LINE wire shall generate the Single-ended output to ground Sine X+Y Signal by BROWN clamp; Choose “Square-wave” the GREEN WITH WHITE LINE wire shall generate the Single-ended output to ground Square X+Y Signal by BROWN clamp; Choose “Sine-Couple” the GREEN WITH WHITE LINE wire and BROWN wire shall generate magnetic X+Y signal: GREEN output (XY+)and BROWN output(XY-).

    6、Generation of Voltage signal
    After power, choose (Voltage signal” (Fig.19), press “CONFIRM” into Voltage Signal interface (Fig.21), “Voltage signal” and “Oxygen Sensor Signal” belongs in one module. Boot default “Voltage signal” to 3.57V, “Oxygen Signal” to “Dilute” 0.1V. Use “UP” “DOWN” and “CONFIRM” choose “Voltage signal” and “Oxygen Sensor Signal”.


    (Fig.21) Voltage Signal Interface

    lSimulation of Voltage Signal: Choose “Voltage Signal” press “CONFIRM” into “Voltage Signal interface” (Fig.14). use “LEFT” and “RIGHT” choose fine tuning voltage ; and “UP” and “DOWN” for coarse tuning. Value range 0.1V---5.0V (Fig.14)
    lSimulation of Oxygen Sensor Signal: Choose “Oxygen Sensor Signal” press “CONFIRM” into “Oxygen Sensor Signal interface” (Fig.15). Use “UP” and “DOWN” adjust oxygen sensor to simulate the output voltage, “Dilute” is about 0.1V,  “Concentrated” is about 0,9V.  
    lSignal Output: Use Voltage signal output cables (ACCES.5), RED wire for voltage simulate signal output; ORANGE one for oxygen sensor simulates signal output.

    7、Generation of PWM Signal
    After power, choose (PWM signal” (Fig.19), press “CONFIRM” into “PWM signal interface”(Fig.17), Boot default “Duty”50%, “Frequency”100Hz. Use “UP” “DOWN” and “CONFIRM” choose “Duty” and “Frequency”:
    lAdjust Duty Cycle: Choose “Voltage Signal” press “CONFIRM” cursor moves to duty value, use “LEFT” and “RIGHT” for fine tuning (stepping 1%); Use “UP” and “DOWN” for coarse tuning (stepping 10%), press CONFIRM when it meet the require, adjust the signal duty instantly.

    lAdjust Frequency: Choose “Frequency” press “CONFIRM” cursor moves to Frequency value, use “LEFT” and “RIGHT” choose unit, tens and hundreds (MAX 999Hz); Use “UP” and “DOWN” for choose value(0-9). ress CONFIRM when it meet the require, adjust the signal frequency instantly.

    lPWM Signal Output: Use X+Y signal output cables(ACCES.4), the YELLOW one for output. This signal could simulate Camshaft signal. Together with X+Y signal can repair the Dual signal ECU.  

    8.Simulation of Resistance Signal
    This instrument equipped Precision Multi-turn pointer potentiometer (Fig.16) (ACCES.7), used for simulate the resistance signal. This potentiometer designed with variety of transfer connectors (Fig.22), convenience for diagnosis.
                     

          (Fig.22)Potentiometer & Connectors

    9、 Signals Combinatorial Output
    The 7 signals (sinusoidal, square-wave, X+Y signal, voltage signal, oxygen sensor signal, resistance signal and PWM signal) can be output simultaneously. If need this kind of application, please choose the eight-line components (ACCES.6) and potentiometer connectors (ACCES.7), access to Auto  electronic control system as needed. Used for diagnosis difficult fault. 


     

    User Comment(Total 0 User Comment Num)

    • No comment
    Total 0 records, divided into1 pages. First Prev Next Last
    Rank:
    Your first & Lat Name:
    Your E-mail Address:
    Review detail:
    Verification code: captcha
    Please feel free to contact us ,If you have any question:
    Email: Sales@obd2tool.com
    Whatsapp: +8618437976115
    skype:chryssan2006



    Shipping Terms:
    a) Items will be sent to all the countries over the world. This package will be sent by DHL, Post, Fedex, EMS or UPS .
    b) Items will be checked carefully before sent out.
    c) We will use air bubbles to wrap the items carefully.

    Shipping Time:
    a) Ships within 48 hours on working days after received the payment.
    b) The shipping time is about 5-7 days via DHL, UPS, 5-10 days Via Fedex, 7-10 days via EMS, 7-30 days via Post to Worldwide
    Note: We hope it arrive on time but since this is an international delivery, shipping time will be highly depended on the courier company and local customs/duties. Thank you for your understanding.

    Return Policies:
    Returns will be allowed only with prior authorization, and must be made within 30 days after package delivery.
    Item conditions that allow returns Brand new Item, returns must include all accessories, Items must include original packaging
    Other cases are as follows:
    (1) When the item is defective, the item was sent in error, damaged in transit, or otherwise defective,It can not work once you receive it. In this case we allow returns. We bear the shipping cost.
    (2) When you buy the wrong item, the item doesn't fit, or you don't want the item, the item you return need to be brand new. you need bear shipping costs.

    Contact Us:
    Our Email sales@obd2tool.com 24 hours 7 days
    And if nobody answer you online in time sometimes,do not worry.leave us a message or write down your desires,we will contact you as soon as possible.

    Attention: PLZ leave your telephone number and address in detail when you take order in our website, it is very important to ship your order. (Customers from Brazil PLZ leave your Cutsom ID also, thanks!)

    Email Subscribe


    Join our community Contact us
    Email us: sales@obd2tool.com 
    Phone: +86 18437976115
    +86 18003909206
    Skype: chryssan2006
    Location:
    Building B016, Haihao Huating, Xixiang Avenue, Xixiang Street, Baoan District,Shenzhen, 518000 China