Tag Archives: CGDI Prog Mercedes Benz

How to slove the error“Load File Failed, error code: 27E1”for CGDI Prog MB Benz Car Key Programmer?

Here’s the final solution to CGDI MB key programmer error: “Load File Failed, error code: 27E1” (shown picture below)   Possible reasons that cause the error: 1).  Device fell on the ground and damaged 2).  Take apart the CGDI main unit manually   CGDI Prog MB host is equipped with an encrypted battery. If you […]

Continue reading >

How to Reset Benz ME9.7 ECU with CGDI Prog MB Benz?

This is the procedure on how to use CGDI Prog Benz Monster to reset/renew Benz ME9.7 ECU.   Procedures: Build wire connection between ME9.7 ECU,CGDI MB programmer and computer   Open CGDI Benz software,click “Wiring Diagram”,then select “ECU”à”ME9.7” to check the your connections are correctly.   Select “Auto Computer”,then click “Read”   After reading process completing,you […]

Continue reading >

How to read, erase and program chip NEC of key Mercedes with CGDI Prog MB Benz Programmer?

  1.NEC Chip 567897041 reading and writing by CGDI MB Click on “Read /write Key”, then “NEC adapter”, then “567897041″, then “Read Key /Chip”. Read successfully, click on “Reset” until get window message “Reset operation succeed”. Back to click on “Read Key /Chip” until read success. Click on “Open /Write”. Please note: Smart key please choose […]

Continue reading >

How to use CGDI ELV Simulator to Renew ESL for Benz 204 207 212

Post is on how to use the ELV Simulator by CGDI Company to Renew ESL for Benz 204 207 212 by working together with CGDI MB tool. Connect CGDI Prog Mercedes Benz to the vehicle via the OBD port, then read the EIS data. Click on “Computer password” to collect the data. The collection process will […]

Continue reading >

How to Program Mercedes A166 All Keys Lost with CGDI MB

Mercedes Benz A166 copy key without key using CGDI Prog MB Key Programmer. Choose Lock(EIS) Click Read EIS data, Choose Compute Password Choose Copy key without key, click Collect Data prepare for collecting data,don’t operate in random! please operate as the software instructed It is collecting data now Collecting data 77% Data collecting finished,please save […]

Continue reading >