Tag Archives: wiTech MicroPod 2

How to reprogram PCM with DRB III Emulator of Chrysler wiTech VCI POD?

I have flash DVD for the wiTech VCI Pod DRB III, hopefully I will get it and can then do programming on a “swap” system. Keeping my fingers crossed. It is Chrysler’s new “policy”   Mopar® is currently phasing out pre-programmed PCMs for the vehicles listed. New modules will no longer be pre-programmed when received from Mopar®. […]

Continue reading >

1

Can DRBIII work on Chrysler Micropod 2 for 2005 Chrysler Crossfire (European)?

The wiTECH Micropod 2 is designed to work on Chrysler, Dodge, Jeep, and North American Fiat vehicles equipped with CAN BUS technology. It provides the latest technology and significant hardware and software performol provides  cutting edge technology will enable technicians to increasance enhancements over the current StarSCAN and StarMOBILE tools. This toe their productivity and provide world-class […]

Continue reading >

1

How to work Chrysler wiTech Micropod 2 with DRB III Emulation?

MicroPOD II function: It can be used as diagnostic and programming tool by the dealerships. It replaces your StarMobile, StarScan, and wi-TECH POD, and enables your technicians to increase their productivity and provide world-class diagnostic services to your customers. A separate Tech Authority  Subscription is required to access to Module Re-Flash Programming, TSBs, wiring diagrams, […]

Continue reading >

5172_P_1544435110659

Solved! wiTECH 2.0 cannot Communicate with Any Module (All Modules are Red)

Here are some solutions of Micropod wiTECH 2.0 communication failure with all modules.   Theory of operation: Below are few different ways communication on a vehicle takes place: Scan tool to the Central Gateway Module (Ex: SGW, TIPM, BCM, etc.)     Module to Module     Module to Device     Device to Module   Communication to […]

Continue reading >

5281_P_1487833787339

Free Download DRB III Emulator for Chrysler Diagnostic Tool V17.04.27 wiTech MicroPod 2

Free download DRB III Emulator on Mega: https://mega.nz/#!1NsDSKYa!L0ZsC5PttRsmYAQhzZR-yK4YQKXAIgwV6ZxwaFEj0t4   DRB III Emulator is the exact scan tool software application used in Chrysler, Jeep, and Dodge dealerships to service non-CAN based vehicles from 1998-2007. The DRB III Emulator software application now runs on your personal computer and interfaces with our custom DRB III+ hardware device to […]

Continue reading >

5281_P_1487833787339

How to install DRBIII Emulator for Chrysler wiTech Micropod 2 on Windows 7 Pro 32-bit?

The procedure for installing DRBIII Emulator on Windows 7 Pro 32-bit: 1: Start with a fresh install of Windows 7 Pro 32-bit.   2: Install all the necessary drivers for your laptop.   3: Set the clock to the current date and time. (It didn’t work when set to 01/01/2017)   4: Connect to WiFi and […]

Continue reading >

Solution to Chrysler Diagnostic Tool wiTech MicroPod 2 V17.04.27 register error

Issue:“Registration is needed Device with serial number** is not registered. Please check the knowledge base to determine how to register a device”   Working Solution: 1.Right click Witech Diagnostic Application-> Properties->Open file location   2.Enter C:/Program Files (x86)/DCC Tools/wiTECH/client. Open app-config text file wiTech MicroPod 2 V17.04.27 is not registered-03   3.Find out “VerificationHash”, then […]

Continue reading >

chrysler diagnostic and key programming tool wiTech MicroPod 2

If you want to fix your vehicles Chrysler, Dodge, Jeep and fiat  problems.  the wiTECH MicroPod 2 tool is your best choice. witech micropod II newest software version is V17.04.27,        https://mega.nz/#!Nm5QRQYR!fVPAE7SNtYa2iE5eqQaZ1zyW7A1nh94-vPGpK1Iu3lg witech micropod 2 only can work on XP computer system or windows 7 computer system. when you install the witechmicropod 2 chrysler diagnostic tool […]

Continue reading >

How to use Chrysler wiTech MicroPod 2 Diagnostic Programming Tool ?

1. Please confirm that you have successfully installed the software. If you don’t know how to install Chrysler wiTech MicroPod 2 software, please check this link: http://www.obd2tool.com/blog/2017/05/12/how-to-install-chrysler-witech-micropod-2-diagnostic-programming-tool/ 2.Connect Chrysler wiTech MicroPod 2 USB Port with PC, OBD2 Port connect with car. 3.The computer will automatically install Chrysler wiTech MicroPod 2 hardware driver 4.After Drive installed, […]

Continue reading >

Best Chrysler Diagnostic Tool wiTech MicroPod 2

wiTech MicroPod 2 can work on newest Chrysler Dodge, Jeep, Fiat cars. software version is 6.04.12,  support multi-language English, French, Spanish, German, Italian, Russian, Japanese, Korean, Chinese,   it is easy to use, Although small in stature, this dongle-style device offers 100 percent CAN coverage for Chrysler, Dodge, Jeep, and Fiat vehicle platforms. This is the […]

Continue reading >