Tag Archives: Mileage Correction

4523_P_1555734684645

Europe Ford Focus Mileage Programming after Replacement by Launch X431

This article show a guide on how to use Launch X431 to program mileage for Europe Ford Focus after instrument cluster replacement. This function is only necessary on newly installed instrument clusters.   The attention of the two points : A,It is not possible to overwrite a value lower than the mileage. B,If the odometer write […]

Continue reading >

V2019 Super DSP3 DSPIII OBD Odometer Correction Tool For New Models 2010-2019 Years Via OBD2 Support more cars than DSPIII

V2019 Super DSP3 vs. SPIII DSP3 Odometer Correction Tool Support MQB platform model: V2019 DSP III adds following odometer correction models: MASERATI / QUARTOPORTE-95160 DIAG    by OBD2 MASERATI / GHIBLI-95160 DIAG    by OBD2 MASERATI / LEVANTE-95320 DIAG    by OBD2   ODOMETER: VW/GOLF SPORTSVAN 06.2014- NEC35XX DIAG    by OBD2 VW/GOLF MK7 06.2014- NEC35XX DIAG    by OBD2 […]

Continue reading >

Digiprog 3 clone Test on VW Golf 6 Odometer Correction

OBD2TOOL engineer share a Digiprog 3 clone test case on VW Golf 6 2012 Mileage programming. Here you go…. Digiprog 3 clone changes km of Golf 6 2012 the current mileage: 212099km connect Mileage Correction Tool Digiprog 3 to the car via OBD then the machine starts select a car: VW-Golf-Golf 6-Tacho Diag 2012 DP3 is reading […]

Continue reading >

Super Dprog5 Odometer IMMO Odometer Airbag 3 in 1 Reset Tool

Super Dprog5 Audi/VW Mileage Programmer is Super Dprog5 IMMO Odometer Airbag Reset Function 3  in 1 Tool. Super Dprog5 VAG Prog2 not only work for mileage adjustment for Audi/VW, but also work for BMW/BENZ immo & airbag reset functions.Super Dprog5 Audi/VW odometer correction tool can replace Data Smart 3+. What functions does Super Dprog5 work do? What Cars Does […]

Continue reading >

How to change the oometer on Peugeot 2004 BSI HC05 With OBDSTAR X300 DP?

OBDSTAR X300 DP/X300pro 3/Key Master/Key Master DP has released free Pin code reading, ecu auto identification, eeprom read/write, odometer correction features for Peugeot/Citroen/DS models:   Here’s an example on reset odometer on Peugeot 2004 BSI HC05 Remove Peugeot BSI box from car Connect X300 DP/Key Master DP with VCI unit and BSI module Turn on […]

Continue reading >

How to correct odometer with DSP3 via OBD adapters

Super DSPIII Odometer Correction Tool Super DSP3 Mileage Programmer fully supports newest high-end Car.   Super DSPIII works for AUDI/VW/ SKODA/SEAT/BENTLE/MERCEDES/ JLR/ VOLVO/ PORSCHE 2010-2017 years of models Mileage Programming via OBD adapters.   How to correct odometer with DSP3 via OBD adapters: Connect the OBD or other adapter with DSP3 Select Odometer Select a model to change km […]

Continue reading >

How to Program Porsche Cayenne 11-15 Smart Key With Lonsdor K518ISE

Here’s the instruction on programming smart key card to Porsche Cayenne from year 2011 to year 2015 by using Lonsdor K518ISEcar key programmer (Lonsdor K518 English version). Function Program smart key: to program smart card (please make dealer key first); Make dealer key: use the backed up BIN data to make the non-dedicated key to be dealer key. Reference […]

Continue reading >

Software Instrallation for digimaster III

This section will show you how to install software of DigiMasterIII as well as how to connect it with your PC. Setp 1: Double-click the installation files in the CD. Step 2: Choose the route of Installation Step 3: Open the software interface as below after installation 2.Connect the D3 with PC and internet Step […]

Continue reading >

the difference between v4.94 version of digiprog III and v4.88 version digiprog 3

the newest version of digiprog 3 is  V4.94 , It is newer then the v4.88 version . V4.94 digiprog III  Add Model List: Audi : -A3 new version Ford : -F150 24C16 -Falcon 24c02 Mercedes : -W176 new version -W204 new version Diag -w212 new version Diag Opel : -Insignia new version -Astra new version […]

Continue reading >