Tag Archives: MB SD C4

10230_P_1563433084883

How to Set WiFi for MB SD Connect C4 PLUS DoIP?

New MB Star SD Connect C4 PLUS DoIP diagnostic multiplexer enables WiFi/WLAN and USB connections. Check the step-by-step wifi setting guide below: Open Administration->SDConnect Toolkit Select Register/configure tab Select the name for SDconnect as 21 Enable both WLAN parameters, workshop and WLAN parameters, road option Set up IP address, encryption type and key as following: […]

Continue reading >

C4

2019.07 MB SD Connect Compact 4 Star Diagnosis Problem Solutions

Purchase Link:  https://www.obd2tool.com/goods-334-MB+SD+Connect+Compact+4+Star+Diagnostic+Tool+With+WiFi.html   MB Star C4 Features: 1. New MB SD Connect Compact 4 Star Diagnosis support wireless diagnose; 2. New MB SD Connect Compact 4 Star Diagnosis not only support K line diagnose and CAN BUS,but also UDS diagnose protocol. 3. Multiplexer now use Lan cable to connect 4. Connector adopt Military quick […]

Continue reading >

MB SD Connect C4 Plus MB Star Diagnostic Tool Support DOIP with Vediamo and DTS Engineering Software

MB SD Connect C4 plus should be the best DOIP diagnostic tool,the new SDconnect C4 (1:1 clone of the original) is able to work for DoIP. It’s the only C4 that supports ethernet communication (DoIP). Tested no issues on new mercedes with doip.   MB SD Connect C4 Plus Feather: 1.When it upgrades the firmware, you […]

Continue reading >

How to set WIFI for MB SD Connect C4 C5 MB Star Diagnostic Tool?

C4/C5 WIFI setting instruction: 1、Right click on the network icon,choose “Open Network and Sharing Center”,as the picture shows: 2、choose“Change adapter settings” 3、set wired IP Set: IP:172.29.127.118    Subnet mask:255.255.0.0 4、set WIFI IP address: 5、set C4/C5multiplexer WIFI connection password,first connect C4/C5 multiplexer to the car(ignition on),then connect lan cable to C4/C5 multiplexer and laptop. Right click on […]

Continue reading >

How to set the information and parameters of the MB STAR SD Connect C4 C5 host LED screen?

This is for those with MB Star diagnosis Tool SD connect C4 C5 multiplexer. We will explain a lot about LED display with message, buttons, icons on the diagnostic system.   Display, buttons and icons: The display is divided into two. In the upper area, permanent icons are shown (see following figure). In the lower […]

Continue reading >

How to do Offline Coding & Programming with DAS for MB SD Connect C4/C5 Star Diagnostic Tool?

Offline coding: SCN or CVN coding was added to the cars back in 2003 if not earlier . The idea of OFFLINE coding was to be able to make SCN codings when you don’t have an internet connection at your workshop to be able to perform this online. In both cases an SCN or CVN […]

Continue reading >

Sloved!Some Mercedes-Benz can’t be tested with MB Star C4/C5 MB SD Connect Compact C4/C5 Diagnosis tool

Recently, there are many customers who have reflected,the following tips appear when testing some Mercedes-Benz cars with V2018.09 MB STAR C4 SD Connect Compact Diagnosis tool: We first checked the hardware of MB STAR C4/C5 and found that the hardware works normally. The problem should be in the software section. One of the customers in […]

Continue reading >

2018.7 Benz Xentry C5 Manual Update, activation, LAN configuration

As the title suggest, this post is on the best quality V2018.7 Mercedes Star Diagnostic Xentry C5 user manual including advantage, update, activation, LAN configuration, Installation in various language etc. Firstly you have to ensure the BENZ Star C5 is like this: Here we go one by one: Advantage Update Activation LAN configuration Installation in various language […]

Continue reading >

How to test old Benz car before 1996 year with MB SD C4 C5 Star

V2017.12 MB SD C4/C5 Star Diagnosis Plus Panasonic CF52 Laptop With Vediamo and DTS Engineering Software Support Offline Many customers contacted: Why can’t MB SD C4 C5 test the old Benz car?Especially the old Mercedes Benz using the 38PIN diagnostic joint before 1996. We checked and found that customers used the xentry software in MB STAR C4/C5 […]

Continue reading >

How to use the HHT software in MB SD Connect C4/C5 to test the old car before 2000 ?

How to use the HHT software in MB STAR C4 C5 to test the old car before 2000 ? Question: Many customers reflect that they can’t test Bens car before2000 year after operating MB STAR C4 C5 2017.01. Many customers report that MB SD Connect C4/C5 2017.01 will not be able to test the Benz […]

Continue reading >