The Blog of www.obd2tool.com

Category Archives: Auto key Programmer

Posted by Vivian

Posted in

Posted in Auto key Programmer

Tagged with , ,

iprog

Feedback and FAQ of Iprog+ Iprog Pro Programmer

Iprog+ Pro car key programmer,it can also support Airbag,carradio,dpf off, ECU,IMMO KEY, MIL TO KM, PINABS, PINCODE SMATRA3,PINCODE SENSOR SPEED LIMIT,ODO Adjust,EEPROM,MCUAtmel,Fujutsu, Microchip,Motorola, Motorola912EN,NECV850,BLR,CAN,CRC-Cript,ibutton,sd-unlocker,test.Supports vehicles till year 2019.   Iprog+ review 1:   Isuzu Dmax 2010 all key lost done by Iprog+   Iprog+ review 2: I ordered one iprog clone, I can cofirm that […]

Posted by Vivian

Posted in

Posted in Auto key Programmer

Tagged with , ,

Continue reading >

Posted by Vivian

Posted in

Posted in Auto key Programmer

Tagged with , , ,

1

HOW TO PROGRAM 2015 RENAULT CLIO IV KEY with OBDSTAR X300 Pro4？

X300 Pro4 is an all-purpose immobiliser programming device meticulously designed by OBDSTAR for locksmith. The device inherits the automobile immobiliser programming technology from OBDSTAR with a lot of advantages of early start, wide model coverage, fast programming speed and special features All-in-one machine structure, more convenient to use full optimization hardware, running more stable, faster […]

Posted by Vivian

Posted in

Posted in Auto key Programmer

Tagged with , , ,

Continue reading >

Posted by Vivian

Posted in

Posted in Auto key Programmer

Tagged with , , ,

1

How to Program BMW F01 CAS4 2010 Remote Key with Lonsdor K518ISE Auto Key Programmer?

Vehicle Model: BMW F-series F01 year 2010   Remote type: PCF7953, 868MHz   Immo type: CAS4 1L16Y   Device to program: key renew tool, Lonsdor K518ise and VVDI Prog   Procedure: Step 1: Renew key (if have new key go to Step 2) Step 2: Read dump Step 3: Add a new key   Step […]

Posted by Vivian

Posted in

Posted in Auto key Programmer

Tagged with , , ,

Continue reading >

Posted by Vivian

Posted in

Posted in Auto key Programmer Car Diagnostic Tools

Tagged with , , ,

fvdi

Reviews of FVDI 2018 ABRITES Commander with 18 Software

FVDI 2018 Reviews 1.mine works on K-line but CAN does not work, as soon as connection with can bus is established the voltage level on the bus drops to near zero and the rest of the data traffic is blocked – the “start communication ” and “tester Present” messages are sent ok but there is […]

Posted by Vivian

Posted in

Posted in Auto key Programmer Car Diagnostic Tools

Tagged with , , ,

Continue reading >

Posted by Vivian

Posted in

Posted in Auto key Programmer Mileage Correction

Tagged with ,

10179_G_1553569631103

Free Download iProg Pro Programmer Software and Installation Steps

Free download 2019 iProg Pro programmer software link: iProg Pro V77: https://mega.nz/#!Lp0gBabA!ITgGaTD6xIi2NMW5dumebQ901EUpTfWIUS6XWlXLYrw   iProg + V76: https://mega.nz/#!lB500aYY!7fQobGqzPhokgB-wU4lUzKCES4ugxAFrfRhyb13Wis   iProg+ v43 and v55: https://mega.nz/#!7LxjCRqD!53iXL6K3Ku_3SAzSN0-3po885aFJYLPSrnTyTYhr1Vg   iProg Pro V77 installation method is same as v76,you just check how to install v76 is enough for v77 installation.   Iprog+ V76 Win7 installation in 7 steps: Open the CD, you […]

Posted by Vivian

Posted in

Posted in Auto key Programmer Mileage Correction

Tagged with ,

Continue reading >

Posted by Vivian

Posted in

Posted in Auto key Programmer

Tagged with , ,

How to Choose Correct Key Programmer on MAN Truck?

Question: I have a MAN TGA 2005 year with FFR. I need to write a new transponder to start the truck but i can’t find the eeprom on the  FFR and does not have proper tool to do it.   Any help?   Answer: Here’s demo guide on MAN truck key programming including eeprom location […]

Posted by Vivian

Posted in

Posted in Auto key Programmer

Tagged with , ,

Continue reading >

Posted by Vivian

Posted in

Posted in Auto key Programmer

Tagged with , , ,

10171_P_1552458531722

How to read and write chip AT93C56-8bit AT93C66-8bit AT25160B with Lonsdor K518S Programmer?

This article is available with Lonsdor K518 KPROG-2 supported eeprom chip reading & writing list (24xxx, 93XX, 25xxx, 95xxx), and the guide of Lonsdor K518S read and write eeprom chip AT93C56-8bit, AT93C66-8bit, AT25160B. First is the adapters connection: Please connect these accessories (number 2,3 4 in the following image) and then to plug to the […]

Posted by Vivian

Posted in

Posted in Auto key Programmer

Tagged with , , ,

Continue reading >

Posted by Vivian

Posted in

Posted in Auto key Programmer

Tagged with , ,

10019_P_1527565557223

How to Solve?Yanhua Mini ACDP Programming lost all authorization after software update

This is a tip for those cannot see authorization after Yanhua Mini  ACDP update.   Image: Yanhua Mini ACDP doesn’t have any authorization after software update If you have the issue, just login the app and go to me, then device authorization information   Then refresh, and your authorization will come back and work   We […]

Posted by Vivian

Posted in

Posted in Auto key Programmer

Tagged with , ,

Continue reading >

Posted by Vivian

Posted in

Posted in Auto key Programmer

Tagged with , , , ,

autel-g-box-3

How to Program a key on Mercedes Benz Vehicles with Autel G BOX Benz & BMW Adapter if All Keys Lost?

AUTEL G-BOX Mercedes All Key Lost BMW DME Reading Usee with both the Autel MaxiIM IM608, IM508 and Auro IM600.   Autel G-Box Adaprer is designed for Mercedez-Benz vehicles with DAS3 CAN EIS/EZS in AKL. It helps to reduce the time for reading the ECU data from W204 and W207 EISs by over 85%.   […]

Posted by Vivian

Posted in

Posted in Auto key Programmer

Tagged with , , , ,

Continue reading >

Posted by Vivian

Posted in

Posted in Autel tools Auto key Programmer

Tagged with , , ,

autel G BOX

Autel G BOX Benz & BMW Adapter Supports Benz All Keys Lost for Autel IM508 IM608

Autel G BOX is a new adapter to works for Auetl MaxiIM IM608 and IM508 with XP400 adapter (also works with Aurodiag IM600 and IM100).It is designed for Mercedez-Benz vehicles with DAS3 CAN EIS/EZS in AKL. It helps to reduce the time for reading the ECU data from W204 and W207 EISs by over 85%. […]

Posted by Vivian

Posted in

Posted in Autel tools Auto key Programmer

Tagged with , , ,

Continue reading >

Next