Tag Archives: MB SD Connect C4 C5

How to activate Xentry of V2019.05 MB SD Connect Compact 4 MB Star C4 C5?

1.Open the icon “ConfigAssist”,choose “SDconnect ”,as the picture shows: 2.Click“Configure”  3.Click the incon like a lock,as below: And you will find Hardware ID nad APP ID information.Please keep it in the interface 4.Open the file Computer- Local Disk(C:)-Program File(x86)-TOOLS,find Application “Xentry Developer exe.”Open it,as below: 5.According step 4 ID information,put Hardware ID and APP ID in the blank […]

Continue reading >

How to do SCN coding online with vxdiag Benz C6 for Mercedes 221?

Need: 1.Online SCN coding account 2.MB SD Connect C6(Can’t use C4/C5 software) 3.One computer with win7 8 10   Procedure: Run Xentry newest version. Passenger cars W211 by automatically scanning. Press “F2” to determine the data. Again, click on”F2″ to determine the data. DAS is initialized communication layer. Get the IMPORTANT NOTE on you should […]

Continue reading >

How to set the information and parameters of the MB STAR SD Connect C4 C5 host LED screen?

This is for those with MB Star diagnosis Tool SD connect C4 C5 multiplexer. We will explain a lot about LED display with message, buttons, icons on the diagnostic system.   Display, buttons and icons: The display is divided into two. In the upper area, permanent icons are shown (see following figure). In the lower […]

Continue reading >

Sloved!Some Mercedes-Benz can’t be tested with MB Star C4/C5 MB SD Connect Compact C4/C5 Diagnosis tool

Recently, there are many customers who have reflected,the following tips appear when testing some Mercedes-Benz cars with V2018.09 MB STAR C4 SD Connect Compact Diagnosis tool: We first checked the hardware of MB STAR C4/C5 and found that the hardware works normally. The problem should be in the software section. One of the customers in […]

Continue reading >

VXDIAG MB SD Connect C6 MB Star C6 Benz Diagnostic Tool with DOIP&AUDIO Function

VXDIAG For XENTRY Diagnosis VCI is the latest interface for For Mercedes & SMART vehicles can replace Star C4/C5. VXDIAG For XENTRY Diagnosis VCI acts as a Pass-through Interface, also called Star C6, For Benz C6 multiplexer to provide complete communication between a vehicle and the VXDIAG For XENTRY software loaded on a PC. VXDIAG […]

Continue reading >

2017.12 MB SD Connect C4 C5 Xentry Start Key Activation

2017.12 MB SD Connect C4 C5 Xentry Start Key Activation Here is the steps to teach you how to activate 2017.12 XENTRY: Step 1: Double Check the icon name ” ConfigAssist” which on the computer desktop. Step2: Select ” SDconnect” Step3: Select ” Configure”. Step 4: Select the icon as picture. Step5: Step 6 and […]

Continue reading >