Tag Archives: MB SD Connect

How to activate Xentry of V2019.05 MB SD Connect Compact 4 MB Star C4 C5?

1.Open the icon “ConfigAssist”,choose “SDconnect ”,as the picture shows: 2.Click“Configure”  3.Click the incon like a lock,as below: And you will find Hardware ID nad APP ID information.Please keep it in the interface 4.Open the file Computer- Local Disk(C:)-Program File(x86)-TOOLS,find Application “Xentry Developer exe.”Open it,as below: 5.According step 4 ID information,put Hardware ID and APP ID in the blank […]

Continue reading >

How to do SCN coding online with vxdiag Benz C6 for Mercedes 221?

Need: 1.Online SCN coding account 2.MB SD Connect C6(Can’t use C4/C5 software) 3.One computer with win7 8 10   Procedure: Run Xentry newest version. Passenger cars W211 by automatically scanning. Press “F2” to determine the data. Again, click on”F2″ to determine the data. DAS is initialized communication layer. Get the IMPORTANT NOTE on you should […]

Continue reading >

Software introduction about 2018.12 MB Star SD Connect C4 C5

Newest version 2018.12 MB Star SD Connect C4 C5 diagnostic software has been tested and verified no issue with SD Connect C4/SD C5 multiplexer.   Software languages: Chinese, English, Croatian, Czech, Danish, Dutch, Finish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Romanian, Russian, Spanish, Swedish & Turkish.   Software includes: 1.DAS 2018.12: the automatically Diagnosis Assistance System […]

Continue reading >

How to activate 2018.12V MB Star DAS & Xentry ?

DAS Open”Get Hardware ID “, Copy the HardwareID and send it to the dealer for generating “license.dat”. Open”license.dat” Open”DAS” EPC WIS Open”EWA net” Name admin Password 12345 Open “CarProKey”     Xentry diagnosis Open”ConfigAssist” “Open computer – Local Disk C-ProgramData-LicDir” copy “lic_key_2.dat”,rename “lic_key_2.x4711″ Set to read-only file.

Continue reading >

How to set the information and parameters of the MB STAR SD Connect C4 C5 host LED screen?

This is for those with MB Star diagnosis Tool SD connect C4 C5 multiplexer. We will explain a lot about LED display with message, buttons, icons on the diagnostic system.   Display, buttons and icons: The display is divided into two. In the upper area, permanent icons are shown (see following figure). In the lower […]

Continue reading >

How to do Offline Coding & Programming with DAS for MB SD Connect C4/C5 Star Diagnostic Tool?

Offline coding: SCN or CVN coding was added to the cars back in 2003 if not earlier . The idea of OFFLINE coding was to be able to make SCN codings when you don’t have an internet connection at your workshop to be able to perform this online. In both cases an SCN or CVN […]

Continue reading >

Sloved!Some Mercedes-Benz can’t be tested with MB Star C4/C5 MB SD Connect Compact C4/C5 Diagnosis tool

Recently, there are many customers who have reflected,the following tips appear when testing some Mercedes-Benz cars with V2018.09 MB STAR C4 SD Connect Compact Diagnosis tool: We first checked the hardware of MB STAR C4/C5 and found that the hardware works normally. The problem should be in the software section. One of the customers in […]

Continue reading >