• Welcome to obd2tool.com ! [Login],New User? [Join Free]
  • bmw icom a2/ a3/ next/ mb star c3/c4/c5/c6 gm tech2/gm mdi/gm mdi2 porsche piwis 2/piwis 3
    Your Position: Home > Auto Scanner Tools > Programmer and Chips > Auto ECU Programmer > KTMflash ECU Programmer & Transmission Power Upgrade Tool Support VAG DQ200 DQ250 Infineon Bosch & 271 MSV80 MSV90


    New Year Deals

    Auto Scanner Tools

    Mileage Correction

    Auto Key and Locksmith Tools

    Motorcycle Scanner Tool

    All-Sun tools

    Humzor Tools

    Remote Tool

    View History

    KTMflash ECU Programmer & Transmission Power Upgrade Tool Support VAG DQ200 DQ250 Infineon Bosch & 271 MSV80 MSV90

    • Item No.  OH136
    • History: 35  sold
    • Quantity
      Free Shipping
    • Quantity:  96
    • Weight:  1.0KG
    • Rank:  comment rank 4 () Write a Review
      Rated 4/5 based on 3 customer reviews
    • This goods is Free shipping!
    • Member Benefits  Shipping  Return Policy




    Technical Support


    KTMflash ECU Programmer & Transmission Power Upgrade Tool Support VAG DQ200 DQ250 Infineon Bosch & 271 MSV80 MSV90

    KTMflash Functions:

    1.Workable Transmission Model
    2.Read Chinese car via OBD
    3.Read BOOT mode according to the chip model
    4.Read the encrypted ECU password (Read the password of encrypted ECU first, then read data)
    Support Chinese car ME17 TC1728/1767 data reading & writing and password reading

    Workable Transmission Model

    VAG: DQ200 (0AM) 

    VAG: DQ200MQB/G2 (0CW) 

    VAG: DQ250C (02E) K-Line 

    VAG: DQ250E/F (02E) 

    VAG: DQ250MQB (0D9) 

    VAG: VL300/V30 (01J/0AN) K-Line 

    VAG: VL300/V30 (01J/0AN)

    VAG: VL381 (0AW) 

    VAG: DQ500 (0BH/0BT) 

    VAG: DL501/G2 (0B5) 

    VAG: DQ200/MQB Boot (MICRO) 

    VAG: DQ200/MQB Boot (EEPROM) 

    VAG: DQ200G2 Boot (MICRO) 

    VAG: DQ200G2 Boot (EEPROM) 

    VAG: DQ250E/F/MQB Boot (MICRO) 

    VAG: DQ250E/F/MQB Boot (EEPROM) 

    VAG: VL300/V30 BSL (FLASH)

    VAG: VL300/V30 BSL (EEPROM) 

    VAG: VL381 Boot (MICRO) 

    VAG: VL381 Boot (EEPROM) 

    VAG: DL501 Boot (MICRO) 

    VAG: DL501 Boot (EEPROM)

    VAG: DL501G2 Boot (MICRO) 

    VAG: DL501G2 Boot (EEPROM) 

    Read Chinese car via OBD

    China: Chery, Great Wall, Lifan, SAIC ME17 (ME17.8.8) 

    China: Chery, Great Wall, Lifan MT80 K-Line Calibration (Delphi MT80)

    China: Chery, Great Wall, Lifan MT80 CAN-bus (Delphi MT80)

    Read BOOT mode according to the chip model

    Infineon: TC1762/TC1766 MICRO (1504KB) 

    Infineon: TC1762/TC1766 EEPROM (32KB) 

    Infineon: TC1792/TC1796 MICRO (2048KB) 

    Infineon: TC1796 MICRO+EXT (4096KB/6144KB) 

    Infineon: TC1796 EXT (2048KB/4096KB) 

    Infineon: TC1796 EEPROM (128KB) 

    Infineon: TC1792 EEPROM (64KB) 

    Infineon: TC1738/TC1767 MICRO (2048KB)

    Infineon: TC1738/TC1767 EEPROM (64KB) 

    Infineon: TC1797 MICRO (4096KB) 

    Infineon: TC1797 MICRO+EXT (6144KB/8192KB)

    Infineon: TC1797 EXT (2048KB/4096KB) 

    Infineon: TC1797 EEPROM (64KB) 

    Infineon: TC1724/TC1728 MICRO (1536KB)

    Infineon: TC1724/TC1728 EEPROM (64KB) 

    Infineon: TC1782/TC1784 MICRO (2560KB) 

    Infineon: TC1782/TC1784 EEPROM (128KB) 

    Infineon: TC1793/TC1798 MICRO (4096KB) 

    Infineon: TC1793/TC1798 MICRO+EXT (6144KB/8192KB) 

    Infineon: TC1793/TC1798 EXT (2048KB/4096KB) 

    Infineon: TC1793/TC1798 EEPROM (192KB) 

    Read the encrypted ECU password (Read the password of encrypted ECU first, then read data)

    Bosch: Support Chinese car ME17 TC1728/1767 data reading & writing and password reading

    Bosch: BMW/MB/VAG GPT 

    Bosch: Ford/Opel/Volvo GPT 

    Bosch: BMW TPROT8+ 

    Bosch: VAG TPROT8+ 

    Bosch: Kia/Hyundai/Honda TPROT8+ 

    Bosch: Chrysler/Jeep/Dodge/Fiat TPROT8+ [Test] 

    Bosch: VAZ/UAZ ME17.9.71  

    Continental: Kia/Hyundai/SsangYong SIM2K-24X/C201 

    Continental: Ford EMS2204

    Continental: Ford EMS2207 

    Continental: Ford EMS2211

    Continental: Ford SID208 

    Continental: Ford SID209 

    Continental: Ford Mondeo 4 SID807EVO

    Continental: Ford Focus 3/Transit Connect SID807EVO 

    Continental: Citroen/Peugeot SID208 

    Kia/Hyundai: Delphi MT86 EEPROM (16KB) 

    Mercedes-Benz: Delphi CRD3.1 EEPROM (32KB) 

    How to use KTMFlASH ECU programmer Switch board? 
    1. The switch board is designed to work with J2534, this device uses the Ktag cables so the user can refer to the Ktag wiring diagram. 
    2. Advise you use Open Port2.0 as the protocol conversion equipment and work with PC.
    3. There are 3 types of Bosch Infineon ECU : 
     1) The Infineon ECU before TPROT8.
     2) TPROT8-10 
     3) The Infineon ECU after TPROT10 which is what we call GPT encrypted. 
    4. The Infineon ECU before TPROT8 is not encrypted, you directly uses the BOOT point 
    grounding, then follow the Ktag user manual to wire the cable and read the data. 
    5.For TPROT8-10,the Bosch Company set the anti-debugging mode, reading EEPROM needs no password and reading Flash needs password. 
    Therefore, during the reading process, there is an extra CNF1, Boot outputs low level and CNF1 outputs high level. When reading, Boot needs to add one small resistor and ground it. CNF1 to connect one 470ohm-2K resistance, then connect 3.3V, it's very important, otherwise the ECU will be burnout. 
    2 tips on reading the data: 
    1) BOOT and CNF1 must be connected when reading data. 
    2) Only connect BOOT not CNF1 When reading the password, otherwise the password can't be read out. Also you can follow the Ktag wiring diagram because Ktag controls the CNF1 turn on and off, so it can't be disconnected. When reading the password, you turn the two switches to the automatic mode, and to the On mode when reading the data, when the software prompts, you choose " Manually" then follow the message to turn on or off.
    6. For GPT encrypted ECU, the S1, S2 and Boot cable are needed to connected when reading password, and the S1, S2 don't need to be connected when reading data.

    Package includes:
    1pc x KTMflash ECU Programmer
    1pc x KTMflash USB Dongle

    User Comment(Total 3 User Comment Num)

    • by KRISTINA BELKNAP,Dec 14,2019

      great device so far,reads info quickly

      Reply #1 by Vivian Dec 14,2019
      Thanks for your feedback.


    • by harold munday,Dec 05,2019

      It does its job quite well, and the customer service was very helpful.

      Reply #1 by Vivian Dec 05,2019
      Thanks for your feedback.


    • by Shoes guniya,Nov 30,2019

      Worked like charm.Its a good buy.

      Reply #1 by Vivian Nov 30,2019
      Thanks for your feedback.


    Total 3 records, divided into1 pages. First Prev Next Last
    Your first & Lat Name:
    Your E-mail Address:
    Review detail:
    Verification code: captcha
    Please feel free to contact us ,If you have any question:
    Email: Sales@obd2tool.com
    Whatsapp: +8618437976115

    Shipping Terms:
    a) Items will be sent to all the countries over the world. This package will be sent by DHL, Post, Fedex, EMS or UPS .
    b) Items will be checked carefully before sent out.
    c) We will use air bubbles to wrap the items carefully.

    Shipping Time:
    a) Ships within 48 hours on working days after received the payment.
    b) The shipping time is about 5-7 days via DHL, UPS, 5-10 days Via Fedex, 7-10 days via EMS, 7-30 days via Post to Worldwide
    Note: We hope it arrive on time but since this is an international delivery, shipping time will be highly depended on the courier company and local customs/duties. Thank you for your understanding.

    Return Policies:
    Returns will be allowed only with prior authorization, and must be made within 30 days after package delivery.
    Item conditions that allow returns Brand new Item, returns must include all accessories, Items must include original packaging
    Other cases are as follows:
    (1) When the item is defective, the item was sent in error, damaged in transit, or otherwise defective,It can not work once you receive it. In this case we allow returns. We bear the shipping cost.
    (2) When you buy the wrong item, the item doesn't fit, or you don't want the item, the item you return need to be brand new. you need bear shipping costs.

    Contact Us:
    Our Email sales@obd2tool.com 24 hours 7 days
    And if nobody answer you online in time sometimes,do not worry.leave us a message or write down your desires,we will contact you as soon as possible.

    Attention: PLZ leave your telephone number and address in detail when you take order in our website, it is very important to ship your order. (Customers from Brazil PLZ leave your Cutsom ID also, thanks!)

    Email Subscribe

    Join our community Contact us
    Email us: sales@obd2tool.com 
    Phone: +86 18437976115
    +86 18003909206
    Skype: chryssan2006
    Building B016, Haihao Huating, Xixiang Avenue, Xixiang Street, Baoan District,Shenzhen, 518000 China