A comprehensive Cluster Calibration tool meeting the needs of those who also require some other advanced options including key programming and airbag reset. It can perform cluster calibration by OBD, by disassembling the meter or by disassembling the chip. Digimaster 3 has a wide vehicle coverage. Folliing is how to use Digimaster 3 to Calibrate Cluster for 2019 Toyota Corolla.
Procedure
Check out Toyota Corolla’s 2019 cluster below. I have Yanhua Digimaster 3 and I am preparing to correct the mileage
Check that there is an 8-pin chip on the front of the cluster and clear text on the chip. 345678 If the test fails, you cannot use a clip, you can use it use an OBP adapter. Remove the chip and solder it to the OBP adapter for reading.
If there is no 8-pin chip from RH66, it means that Digimaster 3 does not support it. Please wipe it clean if you can’t see what’s on it. Hope it helps!
If the test fails, you cannot use a clip, you can use an OBP adapter. Remove the chip and solder it to the OBP adapter for reading.
If there is no 8-pin chip from RH66, it means that Digimaster 3 does not support it. Please wipe it clean if you can’t see what’s written on it.
Hope it helps!
More cases about Toyota, welcome to visit Toyota Trouble Repair.