How to encode via DTS Monaco and ECU Unlock on SEED KEY Calculator on DTS Monaco DIY for Mercedes
Hello friends. today I will show you how to code through Monaco and open access to engine modules, automatic transmission or other modults through the seed. I showed you the same thing through the vediamo program, the link is in the descriptions.
A lot of people asked to teach and show the encoding for Monaco program. Therefore, today I will show the work on Monaco and gaining access to the modules. I do it through openport, you can do it through VXDiag or C4 and etc. For example, today we turn offf the Eco mode
We Select the SMRD file, you can select several pieces at once
In my case, the M274 engine is MED40. You can view your engine via Xentry
In this module, you can change whatever you want but at your own peril and risk.
For example, I show on Eco
Choose disable. The code Changed from D0 to Co
Access closed.
You also need to send a command as on Vediamo, but Monaco dees this for you
Copy 4 bytes
Insert. If you write the code incorrectly, the there will be an error
If you can’t fix the code either, because the code changes every time.
For this, get the code again
Check ECO Mode
But on a new car, even if you turn off Eco, Eco wills still work
