Tag Archives: MB SD C4 Star Diagnostic Tool

MB SD Connect C4 Plus MB Star Diagnostic Tool Support DOIP with Vediamo and DTS Engineering Software

MB SD Connect C4 plus should be the best DOIP diagnostic tool,the new SDconnect C4 (1:1 clone of the original) is able to work for DoIP. It’s the only C4 that supports ethernet communication (DoIP). Tested no issues on new mercedes with doip.   MB SD Connect C4 Plus Feather: 1.When it upgrades the firmware, you […]

Continue reading >

How to activate Xentry of V2019.05 MB SD Connect Compact 4 MB Star C4 C5?

1.Open the icon “ConfigAssist”,choose “SDconnect ”,as the picture shows: 2.Click“Configure”  3.Click the incon like a lock,as below: And you will find Hardware ID nad APP ID information.Please keep it in the interface 4.Open the file Computer- Local Disk(C:)-Program File(x86)-TOOLS,find Application “Xentry Developer exe.”Open it,as below: 5.According step 4 ID information,put Hardware ID and APP ID in the blank […]

Continue reading >

How to set the information and parameters of the MB STAR SD Connect C4 C5 host LED screen?

This is for those with MB Star diagnosis Tool SD connect C4 C5 multiplexer. We will explain a lot about LED display with message, buttons, icons on the diagnostic system.   Display, buttons and icons: The display is divided into two. In the upper area, permanent icons are shown (see following figure). In the lower […]

Continue reading >

How to do Offline Coding & Programming with DAS for MB SD Connect C4/C5 Star Diagnostic Tool?

Offline coding: SCN or CVN coding was added to the cars back in 2003 if not earlier . The idea of OFFLINE coding was to be able to make SCN codings when you don’t have an internet connection at your workshop to be able to perform this online. In both cases an SCN or CVN […]

Continue reading >

Perfectly solve the problem that xentry must be activated each time it is opened with Mercedes-Benz’s new version KeyGen

Some customers reported that Xentry of C4/C5 has been activated and can run normally,but it will show that it need be activated again every time reboot the laptop and run Xentry,as follows: Maybe the reason is: You activated Xentry with old KeyGen. You accidentally changed some files of MB STAR C4/C5. You have installed other […]

Continue reading >

Super Engineer Version DTS Software DTSmonaco V8.3 for MB SD Connect C5 New Available

2017 Mercedes Benz Super Engineer DTS Software Mercedes Benz DTSmonaco Super Engineer Version DTS Software DTSmonaco V8.3 for MB SD Connect C5 New Available With the increasingly powerful software, the system requirements are getting higher and higher, Mercedes- Benz diagnostic software win7 system successfully come out With the Vediamo Mercedes-Benz engineer software exit, Super Engineer […]

Continue reading >

V2016.05 mb sd connect compact 4 Wifi star diagnosis With Vediamo V05.00.06 Engineering Software

Mb sd connect compact 4 is the lastest diagnostic & programming tool for both Mercedes Benz Cars and Trucks. Lastest Software Version: 2016.05. MB SD Connect Compact 4 support reading out & erasing trouble code, reading the real-time data of sensor and actuator, coding and programming. MB SD Connect Compact 4 support wireless diagnose, support K line, CAN BUS and UDS […]

Continue reading >