The procedures to read security code for Hyundai/Kia (46 smart chip) with obdstar X300 DP and mini CN900 (ND900)

I.How to read 12 digits code with MINI900 device? 
There are two types of models need MINI900 device for 12 digits code reading :
a. the model with card slot;   b. the model with one-key start.

1.Specific method for 12 digits code reading of the model with card slot(shown as Figure I):
remove the card slot shell first (shown as Figure II). MINI CN900 cannot receive the vehicle signal directly for the limitation of card slot design, therefore it is necessary to remove the card slot to proceed. If the first time failed, please repeat for several times.

图片1

2.Specific method for 12 digits code reading of the model with one-key start:

directly read the 12 digits code with the MINICN900 device put close to the start button. Shown as below.

图片3

 

Note:When reading 12 digits code of the smart card, pls remove the battery and then operate as above.
After 12 digits code reading is successful, its display sequence is as follow: the last two digits in the second row + all digits in the first row, that is ED F8 98 6F38 83. Shown as below.

图片4

 

II.Procedures for Security Code Reading via OBDSTAR X300DP are as follow:

1. Select vehicle model and the latest software version

图片5

2.Select “Read PinCode” option

图片6

3.Select “Read PinCode(46 Smart Card)”

图片7

 

4.Input the 12 digits code acquired by MINI900

图片8

 

5.Make sure the input value is correct

图片9

 

6.Read the security code successfully

图片10