How to Choose Correct Key Programmer on MAN Truck?

Question:

I have a MAN TGA 2005 year with FFR. I need to write a new transponder to start the truck but i can’t find the eeprom on the  FFR and does not have proper tool to do it.

 

Any help?

1

 

Answer:

Here’s demo guide on MAN truck key programming including eeprom location and tools suggestion.

 

Model: MAN truck 2005 year

Device required:

Orange5 to read dump

Tango key programmer or TMPro2 to write key (TMpro2 require software license)

Transponder key compatible with TGA truck

2

Remove ECU

3

Front side of ECU

4

Back side of ECU

 

Find eeprom IC 95256 and clean IC carefully

5

6

Remove IC at your own risk.

7

Solder IC chip to Orange5 adapter

8

and connect adapter with Orange 5

 

Open Orange5 software, select M95256-V

9

Read IC95256 32Kx8 and save with any name

10

11

In Tango software, select Car Model->MAN->TGA (25128, 25256, MEG13)

12

Upload dump

13

14

Select any position for add key

15

Insert key into Tango key programmer

16

Write key success

No need to write new file

Solder IC back to ECU

Test the new key.

Done.