The GM Tech 2 key fob programming process allows car owners to synchronize their key fobs with their vehicle’s onboard computer system. This programming ensures that the key fob can securely communicate with the car, enabling functions such as remote unlocking, locking, and trunk release.
All key fobs must be programmed each time any one fob is programmed. To program,press and hold the LOCK and UNLOCK key fob buttons prompted by the Tech 2. Programming takes 15-30 minutes…
Case:
1. How to program key fobs on Chevrolet 09 by GM TECH2?
2. How to program key fobs on 2006 HHR
3. How to program 2002 SAAB 9-3 key with GM Tech2 scan tool
4. How to program key fob to 2007 Cadillac CTS-V using a GM Tech2 Tech II scanner
How to program key fobs on Chevrolet 09 by GM TECH2?
Here a procedure on how to program key fobs on Chevrolet 09 by GM TECH2 with 32MB card and CANdi module.
Purpose:
Program Key Fobs
Car model and year:
Passenger car Chevrolet 2009
Chevrolet Scan tool to use:
Tech2 GM Scan Tool with 32MB card (updated) and CANdi module
Step – by -step Procedure:
Setup the GM Tech 2 scan tool
Turn ON the ignition with the engine OFF
Power On the Scan Tool
Click “Enter”
Main Menu > F0: DIAGNOSTICS
Vehicle identification – Model Year > (9) 2009
Vehicle identification – Product Type > Passenger Car
Vehicle identification – Product Make > (1) Chevrolet
Vehicle identification – Product Line > A
Diagnostics > F1: Body
Body> F5: Remote Control Door Lock Receiver
Remote Control Door Lock Receiver > F5: Module Setup
Module Setup > F1: Program Key Fobs
Program Key Fobs > F0: Invalidate all key fobs
Instructions (Follow Instructions, if it doesn’t work repeat entire procedure)
