Tag Archives: MB SD connect C4

10230_P_1563433084883

How to Set WiFi for MB SD Connect C4 PLUS DoIP?

New MB Star SD Connect C4 PLUS DoIP diagnostic multiplexer enables WiFi/WLAN and USB connections. Check the step-by-step wifi setting guide below: Open Administration->SDConnect Toolkit Select Register/configure tab Select the name for SDconnect as 21 Enable both WLAN parameters, workshop and WLAN parameters, road option Set up IP address, encryption type and key as following: […]

Continue reading >

2019 MB SD Connect Compact C4 C5 WIFI Set Up Instruction

MB SD Connect Compact C4 C5 MB Star Diagnosis tool WIFI settings:   1. Right click on the network icon, Select Open Network and SHaring Center, open as shown below : 2. Select “Change adapter settings” on the left. 3. Setting wired IP   Setting: IP:172.29.127.118    Subnet mask:255.255.0.0 4. Set the WIFI IP 5. Enter […]

Continue reading >

10229_P_1563421256234

How to set IP address for MB SD Connect C4 DoIP Diagnostic Scanner ?

When you use new MB Star SD Connect C4 DoIP diagnostic scanner, you need set IP address first.Follow steps below shows how to configure SD Connect C4 DoIP multiplexer:   1.Go to local network connection 2.Press Properties 3.Choose Internet Protocol Version 4 (TCP/IPv4), press OK to continue 4.Enter IP address IP address: 172.29.127.24 Subnet mask: 255.255.0.0 5.Click […]

Continue reading >

MB SD Connect C4 Plus MB Star Diagnostic Tool Support DOIP with Vediamo and DTS Engineering Software

MB SD Connect C4 plus should be the best DOIP diagnostic tool,the new SDconnect C4 (1:1 clone of the original) is able to work for DoIP. It’s the only C4 that supports ethernet communication (DoIP). Tested no issues on new mercedes with doip.   MB SD Connect C4 Plus Feather: 1.When it upgrades the firmware, you […]

Continue reading >

MB SD Connect C4/C5 Star Diagnosis tool cannot measure the car

The customer connected the Mercedes-Benz to be tested, opened the MB SD Connect C4/C5 xentry software, and selected the corresponding model. The final step of the test is as follows: The above problem occurred and the hardware of MB SD Connect C4/C5 was not found. Generally there are three problems: 1. MB SD Connect C4/C5 […]

Continue reading >

How to set WIFI for MB SD Connect C4 C5 MB Star Diagnostic Tool?

C4/C5 WIFI setting instruction: 1、Right click on the network icon,choose “Open Network and Sharing Center”,as the picture shows: 2、choose“Change adapter settings” 3、set wired IP Set: IP:172.29.127.118    Subnet mask:255.255.0.0 4、set WIFI IP address: 5、set C4/C5multiplexer WIFI connection password,first connect C4/C5 multiplexer to the car(ignition on),then connect lan cable to C4/C5 multiplexer and laptop. Right click on […]

Continue reading >

Software introduction about 2018.12 MB Star SD Connect C4 C5

Newest version 2018.12 MB Star SD Connect C4 C5 diagnostic software has been tested and verified no issue with SD Connect C4/SD C5 multiplexer.   Software languages: Chinese, English, Croatian, Czech, Danish, Dutch, Finish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Romanian, Russian, Spanish, Swedish & Turkish.   Software includes: 1.DAS 2018.12: the automatically Diagnosis Assistance System […]

Continue reading >

Sloved!Some Mercedes-Benz can’t be tested with MB Star C4/C5 MB SD Connect Compact C4/C5 Diagnosis tool

Recently, there are many customers who have reflected,the following tips appear when testing some Mercedes-Benz cars with V2018.09 MB STAR C4 SD Connect Compact Diagnosis tool: We first checked the hardware of MB STAR C4/C5 and found that the hardware works normally. The problem should be in the software section. One of the customers in […]

Continue reading >

VXDIAG MB SD Connect C6 MB Star C6 Benz Diagnostic Tool with DOIP&AUDIO Function

VXDIAG For XENTRY Diagnosis VCI is the latest interface for For Mercedes & SMART vehicles can replace Star C4/C5. VXDIAG For XENTRY Diagnosis VCI acts as a Pass-through Interface, also called Star C6, For Benz C6 multiplexer to provide complete communication between a vehicle and the VXDIAG For XENTRY software loaded on a PC. VXDIAG […]

Continue reading >

2018. 03 MB SD Connect C4 C5 Xentry Start Key Activation

Here is the steps to teach you how to activate XENTRY: Step 1: Double Check the icon name “starkey Center ” which on the computer desktop.

Continue reading >