How to change mileage for 2010 VW NEC+ 24C32 VDO by XTOOL X100 PRO2

How to change mileage for 2010 VW NEC+ 24C32 VDO by XTOOL X100 Pro2

NOTE: Adjusting the mileage on a vehicle should only be done if replacing the odometer or ECU or other issues change the mileage of the vehicle.

Connected X100 PRO2 to the OBD port of my car via the main cable. And turn the ignition switch on.
Now the mileage is 86231 now.

Then go to dashboard function, and select where the car was made not where you’re at.
So I’m going to select Europe, VW, 2010 NEC+ 24C32 VDO, then select mileage adjustment and mile.

There is a note appears on the screen:
Before modifying mileage, make a backup of the EEPROM data.
Just read it and go to read the data.
It reads out the original mileage is 86254 mile. It’s a little different from the value on the dashboard, but it’s ok.

So I go to change mileage. Input the new value 82100 mile.

Awesome! The mileage is changed successfully, now the value on the dashboard is 82079 mile.

I’ve known some users say they cannot change mileage on their car with XTOOL X100 PRO2 auto key programmer. I don’t think it will work on all models, so it’s better to contact us before buying.

https://www.obd2tool.com/goods-10277-XTOOL-X100-Pro2-Auto-Key-Programmer.html