Tag Archives: Chrysler wiTech MicroPod 2

Solution to Chrysler Diagnostic Tool wiTech MicroPod 2 V17.04.27 register error

Issue:“Registration is needed Device with serial number** is not registered. Please check the knowledge base to determine how to register a device”   Working Solution: 1.Right click Witech Diagnostic Application-> Properties->Open file location   2.Enter C:/Program Files (x86)/DCC Tools/wiTECH/client. Open app-config text file wiTech MicroPod 2 V17.04.27 is not registered-03   3.Find out “VerificationHash”, then […]

Continue reading >

How to use Chrysler wiTech MicroPod 2 Diagnostic Programming Tool ?

1. Please confirm that you have successfully installed the software. If you don’t know how to install Chrysler wiTech MicroPod 2 software, please check this link: http://www.obd2tool.com/blog/2017/05/12/how-to-install-chrysler-witech-micropod-2-diagnostic-programming-tool/ 2.Connect Chrysler wiTech MicroPod 2 USB Port with PC, OBD2 Port connect with car. 3.The computer will automatically install Chrysler wiTech MicroPod 2 hardware driver 4.After Drive installed, […]

Continue reading >

How to install Chrysler wiTech MicroPod 2 Diagnostic Programming Tool?

WARNING; The computer on the day of the date 1.PC-Based: Requires PC connected to the network 2.Run Chrysler wiTech MicroPod 2 CD software as picture 3.Firstly, installation AdobeAIRInstaller.exe 4.Secondly, installation jre-6u45-windows-i586.exe 5. Finally, installation wiTECH_Install_17.03.10.exe 6.After successful to install the software, the desktop will appear Chrysler wiTech MicroPod 2 software icon is as follows: 7. […]

Continue reading >