Tag Archives: MB star C4

MB SD Connect C4 C5 DTS monaco software user manual

What is DTS-monaco? DTS monaco software is development by Mercedes Benz manufacturers ,all car data one click scan and save. Data can be directly change the underlying data, the module used directly copied data replacement. Automatic programming, can automatically set code completely out of online operation.   DTS-monaco newest version: V8.14.016   DTS-monaco introduction: 1.DTS-monaco […]

Continue reading >


How to Set WiFi for MB SD Connect C4 PLUS DoIP?

New MB Star SD Connect C4 PLUS DoIP diagnostic multiplexer enables WiFi/WLAN and USB connections. Check the step-by-step wifi setting guide below: Open Administration->SDConnect Toolkit Select Register/configure tab Select the name for SDconnect as 21 Enable both WLAN parameters, workshop and WLAN parameters, road option Set up IP address, encryption type and key as following: […]

Continue reading >

2019 MB SD Connect Compact C4 C5 WIFI Set Up Instruction

MB SD Connect Compact C4 C5 MB Star Diagnosis tool WIFI settings:   1. Right click on the network icon, Select Open Network and SHaring Center, open as shown below : 2. Select “Change adapter settings” on the left. 3. Setting wired IP   Setting: IP:    Subnet mask: 4. Set the WIFI IP 5. Enter […]

Continue reading >


2019.07 MB SD Connect Compact 4 Star Diagnosis Problem Solutions

Purchase Link:  https://www.obd2tool.com/goods-334-MB+SD+Connect+Compact+4+Star+Diagnostic+Tool+With+WiFi.html   MB Star C4 Features: 1. New MB SD Connect Compact 4 Star Diagnosis support wireless diagnose; 2. New MB SD Connect Compact 4 Star Diagnosis not only support K line diagnose and CAN BUS,but also UDS diagnose protocol. 3. Multiplexer now use Lan cable to connect 4. Connector adopt Military quick […]

Continue reading >

MB SD Connect Compact 4

Compare with MB STAR C4 C5 C6 , Which one support DOIP ?

  Today, we’ll talk about DoIP support and MB STAR tools C4/C5/C6 from clone to original.   1.Popular version: MB SD Connect Compact 4 This one is one of the most stable quality in china, priced around 360usd. it can support K and CAN and truck 24v, but it can’t support DOIP. and also no DOIP […]

Continue reading >

MB SD Connect C4 Plus MB Star Diagnostic Tool Support DOIP with Vediamo and DTS Engineering Software

MB SD Connect C4 plus should be the best DOIP diagnostic tool,the new SDconnect C4 (1:1 clone of the original) is able to work for DoIP. It’s the only C4 that supports ethernet communication (DoIP). Tested no issues on new mercedes with doip.   MB SD Connect C4 Plus Feather: 1.When it upgrades the firmware, you […]

Continue reading >

MB STAR C4 C5 mb sd connect software has updated to 2019.07 with Super Engineering Software DTS monaco And Vediamo

Mb star c4 c5 Software list: DAS 2019.07: the automatically Diagnosis Assistance System Xentry 2019.07: New software released by Bennz Company after 04/2009 by diagnosis new cars. WIS net 2018.11:Workshop Information System Supply the whole view of the wiring diagram in a car, component location diagram and maintenance method. What you do is to enter […]

Continue reading >

How to activate Xentry of V2019.05 MB SD Connect Compact 4 MB Star C4 C5?

1.Open the icon “ConfigAssist”,choose “SDconnect ”,as the picture shows: 2.Click“Configure”  3.Click the incon like a lock,as below: And you will find Hardware ID nad APP ID information.Please keep it in the interface 4.Open the file Computer- Local Disk(C:)-Program File(x86)-TOOLS,find Application “Xentry Developer exe.”Open it,as below: 5.According step 4 ID information,put Hardware ID and APP ID in the blank […]

Continue reading >

How to set WIFI for MB SD Connect C4 C5 MB Star Diagnostic Tool?

C4/C5 WIFI setting instruction: 1、Right click on the network icon,choose “Open Network and Sharing Center”,as the picture shows: 2、choose“Change adapter settings” 3、set wired IP Set: IP:    Subnet mask: 4、set WIFI IP address: 5、set C4/C5multiplexer WIFI connection password,first connect C4/C5 multiplexer to the car(ignition on),then connect lan cable to C4/C5 multiplexer and laptop. Right click on […]

Continue reading >

How to do SCN coding online with vxdiag Benz C6 for Mercedes 221?

Need: 1.Online SCN coding account 2.MB SD Connect C6(Can’t use C4/C5 software) 3.One computer with win7 8 10   Procedure: Run Xentry newest version. Passenger cars W211 by automatically scanning. Press “F2” to determine the data. Again, click on”F2″ to determine the data. DAS is initialized communication layer. Get the IMPORTANT NOTE on you should […]

Continue reading >