Best quality  BMW ICOM BMW ISIS ISID A+B+C  2021.06 Engineers Version

The Video:

ICOM A+B+C for BMW ISIS ISID A+B+C is the latest program, diagnose, coding system for all BMW Series cars, mini  etc. It is the full system which can replace DIS GT1/SSS/OPS and OPPS.

Software Version : V2021.06

ISTA - D: 4.29.21,with SDP Programming Database 4.29.21

ISTA - P: 3.68.0.800 with Engineer Programming，supports the programming of BMW motorcycles and electric vehicles can program F/G/I/K chassis for car (through the ICOM, not other cable )

Vin: V2021.04.25

BMW ETK: 2019.12

BMW KSD: 2019.12  Multilanguage

BMW FSC Navigation Code Generator

BMWAiCoder for BMW Coding

Win10 64 bit operating system

BMW ICOM V2021.06, With free Software:

1. Get engineer version, INPA 5.00,winkfp 5.2.3,NCS 3.5.1, e-sys 3.31,data V68.0

2. get Chinese software DR.GINI B020

3. get count code navigation tool software FSC operator code

4. get one-clik hidden brush tool BMWAi V4.6

5. Add DIS Software for Old cars, DISV57 and DISV44,diagnosis and programming for BMW virtual machines

6. Support Vehicles: For BMW Cars,For BMW Motorcycle,For Rolls-Royce, For Mini Cooper

 

ISTA-P/ISTA-D Multi-language available in diagnosing, programming and TIS diagram circuit:

British English, German, Spanish, French, Italian, polish, Portuguese, Turkish, Czech, Swedish, Dutch, Indian, Greek, Russian, Simplified Chinese, Traditional Chinese, Japanese, Korean and Thai.

Notice : The software installed English language in default.

System Requirements:
Dual-core processor, better above I3; over 4G of memory
  

Support Model:
It is recommended to use Lenovo ThinkPad: T61, T400, T410, T420, T430, X61, X200, X201, X220 X230 and other laptop with Intel chipset, such as I3 I5 / I7 series.

1.ICOM A  (16PIN interface)
ICOMA is the basic component. In physical terms, it would provide the vehicle diagnostic interface OBD II interface, and to provide adaptive integration to the repair shop network interfaces required. Computer through an efficient core, which is responsible for testing as a protocol converter device and vehicle control unit and connected to the data exchange between the measurement techniques required for signal processing. Supply voltage by KL30 by vehicle interface. ICOM A requirement of the electrical operation of a minimum voltage of 8V. Only the supply voltage exceeds the minimum limit in order to ensure a stable function

            

2.ICOM B function (MOST interface)
ICOM B is the external ICOM A MOST (Multimedia Transmission System) interface. It is through the USB cable to connect with ICOM A. Supply voltage provided by ICOM A through USB. Only when the lowest of the ICOM A supply voltage of 8V, when, ICOM B would only be ready to run the electrical side of the vehicle through a standard ICOM B MOST interface.
                       

3. ICOM C function (20PIN interface)
ICOM C is an intelligent interface converters that allows OBD II socket and BMW round match. As the lengthening of the auxiliary module, it will ICOM A and non-OBD II vehicle interface connections. Supply voltage from the vehicle side of the circular socket by KL30 provided. ICOM C electrical operation provides for a minimum voltage of 8V. KL30 on the voltage sent to the OBD II device on the inside, and thus to ICOM A power supply. Only when the vehicle’s battery voltage exceeds the minimum limit in order to ensure stability of the two devices interact. 

4.ICOM A Extension Cable (16PIN Interface extension cord)
ICOM A was due to different models and different models and their own weight, a direct connection OBD-II diagnostic blocks are susceptible to loss and poor contact, the use of extension cords, connecting reliable, easier to use.

BMW ICOM / ISIS / ISID BMW new detector (off-line programming support) BMW ICOM / ISIS (including computers, a complete set of configuration, support for off-line programming, diagnostics).

5.Network cable
Network cable used to connect the BMW ICOM A module and the computer network port.

6.USB Cable
USB Cable used to connect the BMW ICOM A module and B module.

Package List: 

1pc x BMW ICOM A Moudel

1pc x BMW ICOM B Moudel

1pc x BMW ICOM C (BMW 20pin Cable)

1pc x USB Cable

1pc x OBD2 Cable

1pc x LAN Cable

1pc x BMW ICOM HDD Fit All Computer For BMW ICOM & ICOM A2

User Comment(Total 2 User Comment Num)

• by Kris Clement,Jul 10,2014
  

  Hello,dear friend,
  This item looks great! but,I wonder this item can work on bmw till 2011 ?
  Thanks

  Reply #1 by OBD2TOOL Jul 10,2014
  Dear friend
  It use original factory software,original factory can do till 2011,then this can do till 2011. But we do not have software,please pay attention.You need buy it from original factory.
  Thank you and best regards!
  
  OBD2TOOL

  ---

• by Aydin Bac,May 06,2014
  

  need information, I wonder if this machine works on any computer, tracking the software and service manuals. I await the answer

Total 2 records, divided into1 pages. First Prev Next Last

Rank:
Your first & Lat Name:
Your E-mail Address:
Review detail:
Verification code: